Riyadh, RICEC · 29 November to 1 December 2027 · Automation and Industry 4.0

Saudi Industrial Transformation Exhibition Stand 2027: Robots, Data and Automation You Can Watch

Industrial Transformation Saudi Arabia, the show most people look up as the Saudi Industrial Transformation exhibition, is a Hannover Messe event staged in Riyadh by Riyadh Exhibitions Company together with Deutsche Messe, with the Ministry of Industry and Mineral Resources as its patron. Its home page and its visitor guide place the next edition from 29 November to 1 December 2027 at the Riyadh International Convention and Exhibition Center. The list of what may be exhibited is short and technical: automation and advanced manufacturing, digitalisation and AI, additive manufacturing, intralogistics, industrial wireless and 5G, and energy with smart grids. That makes a Saudi Industrial Transformation exhibition stand a working demonstration more than a showroom. A robot arm finishes a pick and place cycle, a mobile robot finds its own route across the floor, a printer builds a bracket layer by layer, a screen plots sensor data as it arrives. The audience the organiser courts for that demo is factory owners, investors, EPC contractors, system integrators and government decision makers. Counting from this November, a little more than a year separates exhibitors from the opening: time enough for any booth format and for the slow parts of an automation exhibit, namely shipping the equipment, clearing it and proving the demo. This guide covers what the official pages state and where they contradict each other, what to settle with the organiser, which booth suits which automation technology, and a dated plan working backwards from the first morning.

29 Nov 2027first day, per the visitor guide
8,420visitors at the 2025 edition, per its recap
6technology sectors on the exhibit list
24hfor an itemised booth price after your brief

Industrial Transformation Saudi Arabia 2027 in Facts

Each row below comes from the official site, the Riyadh Exhibitions Company site or the Deutsche Messe pages, read on the day shown beneath the table. The show site sits part way between two editions. Its home page, visitor guide and summit page give 29 November to 1 December 2027, and so does Riyadh Exhibitions Company on its own site, while the about page, the exhibitor booking page and the news page still carry 30 November to 2 December 2026, with no notice explaining the change. Treat the 2027 dates as the published plan, and get the sales team to confirm the edition you are booking in writing before money moves. The site also names RICEC as the venue. For the other industrial and technology fairs this season, with a source against every date, open our exhibitions calendar.

Saudi Industrial Transformation

Dates29 November to 1 December 2027
VenueRiyadh International Convention and Exhibition Center
CityRiyadh
OrganiserRiyadh Exhibitions Company
SectorSmart manufacturing
Official pagerecexpo.com
Venue named on the official siteRiyadh International Convention and Exhibition Center (RICEC). The visitor guide sends visitors to Gate 3, and VIP guests to Gate 5 on King Abdullah Branch Road, where VIP parking is free and valet is offered
Exhibition hours, from the visitor guideDay one from 11:30 AM to 9:30 PM; days two and three from 12 PM to 9:30 PM
Summit hoursDay one 9 AM to 3:50 PM, day two 9 AM to 3:10 PM. The conference owns the morning and the halls open around midday
Who runs itRiyadh Exhibitions Company for local and GCC services, Deutsche Messe for international services. The site brands the show a Hannover Messe event
PatronageThe Ministry of Industry and Mineral Resources. A Deutsche Messe press release names ASAS, the developer and operator of industrial cities, as the ministry's representative in the partnership
The six sectorsAutomation and advanced manufacturing; digitalisation, AI and innovation; additive manufacturing and 3D printing; intralogistics, material handling and warehousing; wireless, 5G and industrial IoT; energy solutions and smart grids
Zones listed on the home page3D Printing Zone, Application Park Zone and Robotics Experience Zone, with a Startup Zone, an Investor Lounge and the Summit and Tech Stages
The first editionHeld 1 to 3 December 2025 at RICEC, per Deutsche Messe. The recap page counts 283 exhibitors from 18 countries, 30 startups, 8,420 visitors, 110 speakers and 40 MOUs signed
Who the organiser wants to reachSenior decision makers from government and industry, investors, factories, EPC contractors, system integrators and regional leaders
Space on the request formSizes of 9, 12, 15, 18, 21, 24 and 27 square metres, or a box for anything bigger, taken either as bare floor or with a stand the organiser fits out
EntryNobody below 16 years of age. Hands on classes and conference sessions cost nothing but must be booked in advance
Getting thereThe visitor guide suggests the metro Red Line to the Riyadh Exhibition stop, as well as buses, taxis and the Uber and Careem apps
A different show at the same venueSaudi Industrial Expo, run by dmg events at RICEC from 13 to 15 September 2027. It has its own organiser, forms and deadlines

Official sources we read: Industrial Transformation Saudi Arabia, home page, About the show, Visitors guide, Become an exhibitor, Exhibit profiles, 2025 edition recap, Summit programme, Hannover Messe worldwide, Show news, Riyadh Exhibitions Company, Deutsche Messe, show page, Deutsche Messe press release on the first edition, Saudi Industrial Expo, a separate show. Sources last checked: 16 November 2026.

Questions for the Organiser Before Your Equipment Ships

You will not find an exhibitor manual or a FAQ on the official site, nor a rate per square metre, and never lists what comes with the stand the organiser fits out. Exhibitors request space through a form; Riyadh Exhibitions Company answers for local and GCC companies and Deutsche Messe for international ones. So none of the cards below is presented as a rule of the show. Each is a point that a booth full of moving machines, radios and batteries raises, and only the documents for the 2027 edition can settle it. Put these points to the sales team by email after your contract is signed, then forward their replies to us together with your brief.

Which edition, on which dates

Because several pages still carry the 2026 dates, your first email to the sales team should confirm the edition you are contracting, its show days and its build days. Keep that reply on file before freight, flights or visas are booked for the engineers who travel with the equipment.

Rules for a robot that moves

An industrial arm in motion normally needs guarding or a safety rated zone, and organisers tend to set conditions for any machine running near the public. Ask what the hall requires around a working cell, whether a collaborative robot may run without a fence, and who inspects it before the doors open.

Floor conditions for mobile robots

An AGV or AMR demo needs a level, unbroken surface and markers it can read. Ask whether the floor at your position is flat enough, whether tape or printed floor graphics may be laid, and whether the robot may ever cross your booth line. The answer decides the layout before any graphic is drawn.

Network, wireless and 5G

Dashboards, digital twins and industrial IoT demos stall without a steady connection. Ask what wired internet the booth can order, how fast it is, and whether a private Wi-Fi network or a private 5G cell is allowed, since a hall crowded with radios is a noisy place for any wireless automation demo.

Batteries, hydrogen and storage units

The energy sector here covers batteries, fuel cells and storage. Ask in writing what may stand on the booth charged or live, what must arrive empty, and which fire safety papers the venue expects for a battery cabinet or a hydrogen exhibit.

Electricity for many loads at once

Robot controllers, printers, servers and lit screens all run together through long afternoons. Find out which details the power request needs, the cut off date for sending it, and whether three phase supply reaches your space.

Your own builder, and whether a list applies

The open site says nothing about stand contractors. If it turns out that the organiser works from a list of approved or registered stand builders for 2027, get that confirmed by the organiser in writing before any builder is signed, The Touch included. The builder you choose then files the drawings, the insurance certificate and the crew passes before the deadline the organiser sets.

Our part is to prepare whatever drawings and documents the organiser and RICEC request; granting approval is entirely theirs. What has to be filed in the closing weeks is listed step by step in our exhibitor checklist, and if a meeting deck above the demo appeals, read our note on two storey stand rules before you book the space.

Booth Formats for Each Technology on Show

With six technology sectors under one roof, a software house showing a digital twin needs a very different space from an integrator running a palletising robot. The formats below, from the lightest commitment to the largest, cover most briefs for a Saudi Industrial Transformation exhibition stand.

Fitted space, made to work

The space the organiser fits out, upgraded with printed walls, a standing height demo counter, a wall screen and stronger light. When the organiser has told you what the fitting includes, allow 2 to 3 weeks; a sensible start for a young automation company trying the Saudi market.

Software and AI booth

For MES, ERP, digital twin and predictive maintenance vendors the product lives on a screen. A 9 or 18 square metre plot holds demo stations facing the aisle, a seated corner for a longer walkthrough, and one real object, a motor or a sensor, that the software is shown watching.

Robot cell booth

Everything starts from the cell: a viewing edge for the crowd, clear sightlines through the guarding, a control desk where an engineer explains the program, and a locked store for spares. A custom build like this asks for 6 to 8 weeks, counted from the day the brief is approved to the first show day.

Intralogistics demo track

For AGVs, AMRs and automated picking the floor is the stage. A printed route, a short run of racking and a pick station show a full cycle, while the meeting table stays well away from the robot's path.

Modular kit for several shows

A reusable frame that takes a fresh set of graphics within 2 to 4 weeks and waits in our storage from one event to the next. It suits an integrator that also exhibits at other industrial shows in the Kingdom during the season.

Island for a technology group

A group with automation, energy and digital lines may take an island: a demo bay for each line, a closed room for investor and EPC talks, and a single reception. Reserve 8 to 10 weeks for it, counted from the signed brief.

Energy and smart grid display

Batteries, switchgear and storage cabinets are heavy, and seen from a distance one grey cabinet resembles the next. The booth gives them a plinth, a cutaway panel or a live load display, and a screen showing what the system changes inside a plant.

Saudi Industrial Transformation Exhibition Stand: Working Back from 29 November 2027

For a Saudi Industrial Transformation exhibition stand, every date in this table is derived from opening morning, which sits in its final row. More than a year lies between this November and that morning, and that year is best spent on what moves slowly in automation: a robot or production cell arriving by sea or air and passing customs, the temporary import papers for demo kit that must leave again, an integration test of the full demo, and sign off from head office for every software screen shown in public. The booth has to be drawn around real equipment, so dimensions, weights and the cable plan should reach our factory well ahead of the trial build there. Each stage is explained in our guide on how long a stand takes.

Saudi Industrial Transformation · 29 November to 1 December 2027

DateStageStatus
4 October 2027The brief, the space contract and the exhibitor manual in hand: a custom stand starts hereAhead
18 October 2027Design approved, and drawings sent to the organiser where it asks for themAhead
1 November 2027Last sensible start for a modular stand with new graphicsAhead
8 November 2027Graphics go to print on the final panel sizesAhead
15 November 2027Full test assembly in the factory, and the last start for a rental kit from stockAhead
22 November 2027Transport booked for the build window the organiser setsAhead
·Installation in the hall, inside the hours written in the exhibitor manualPer the exhibitor manual
29 November 2027Opening dayAhead
1 December 2027Closing, then dismantling in the organiser's windowAhead

What is still realistic for this edition · 382 days to openingThere is time for a custom stand on the normal schedule, provided the design is approved on its date.

Status worked out on 12 November 2026.

What Holds Visitors at an Industry 4.0 Show

People here are engineers, plant managers and investors who have sat through plenty of slides. They stop for something that works in front of them and stay for a result they can take back to their own factory. A Saudi Industrial Transformation exhibition stand earns its floor space by giving them both.

A demo that completes its task

An arm tracing patterns in empty space convinces nobody. Let it finish real work, sorting, packing, gluing or tracing a weld seam, in a cycle short enough that a visitor standing still sees all of it.

The result printed beside the machine

The organiser invites exhibitors to present KPI based case studies. Put the before and after next to the demo: cycle time, scrap, energy per part, unplanned stops. One figure from a real plant persuades more than any slogan.

Live data on a large screen

Link the demo to a dashboard so each pick or print appears as data the moment it happens. Visitors see the physical machine and the software layer as one system, which is the whole subject of this show.

Printed parts people can hold

A printer at work is slow to watch. Keep one running for the curious, and beside it a tray of finished parts with the material, print time and application on a card, so the visitor handles the outcome.

Separate routes for robots and people

Mark the robot path with a printed floor line and low barriers, and let the robot stop by itself when someone steps in. Visitors trust the demo more once they have seen it give way.

A closed table for integrators and EPCs

Contract talks with EPC contractors and system integrators need a door, a screen and room for drawings. Put that room at the back of the booth, away from fans, compressors and motors.

Arabic and English on every panel

Government officials and Saudi plant owners read both. Give each demo a headline in the two languages, and keep technical terms in English where the trade uses them that way.

Meetings timed around the summit

Sessions fill the mornings and the halls open near midday. Book the early afternoon with speakers and delegates leaving the stages, and rest engineers so they are sharp for the evening.

A greeter who filters

At a robotics demo the curious outnumber buyers. A host posted at the booth edge asks what line the visitor runs or plans to automate, records the contact, then introduces the right engineer, so specialists spend the afternoon with serious prospects.

Further Reading for Automation Exhibitors

Since the halls are in Riyadh, access, build crews and site logistics in the capital are covered under exhibition stands in Riyadh, and an evening for clients or a product launch in the same week under event management in Riyadh. Every other industrial fair of the season, with the company behind it, is listed in the trade show calendar we keep. To size the budget, read what an exhibition stand costs in Saudi Arabia. Integrators who tour the same booth from show to show should look at modular exhibition stands; a single bespoke build starts from custom exhibition booths; and screens or machines shown in a darker bay gain a lot from our stand lighting guide.

Mistakes Technology Exhibitors Make Before and During the Show

All six can be prevented from an office chair long before build up, and every one of them quietly drains leads when nobody owns it.

Planning on a stale date

Parts of the site still show the 2026 dates. A visa, a container or a hotel block booked on them is wasted. Plan only on dates the organiser confirms to you in writing.

Mixing up two industrial shows

Saudi Industrial Expo and Industrial Transformation Saudi Arabia both use RICEC in 2027, under different organisers, one in September and the other at the end of November. Put the exact show name and organiser on every form, drawing and shipping label.

A demo never run on the booth

Kit that worked in the lab can fail on hall power and a crowded network. Run the whole demo during build up with time left to fix it, never for the first time on opening morning.

Screens instead of machines

A booth of screens playing a brand film looks like every other one in the aisle. Bring at least one physical thing that moves, measures or gets made on the spot.

No answer on local support

Plant buyers ask who installs, who services and who keeps spare parts in the Kingdom. If the answer is a partner, name the partner on the booth and bring someone from it.

Forgetting the way home

Demo robots and printers often have to leave the country after the show. Plan the dismantling, the crating and the return paperwork before the build begins.

Built and Test Assembled Before It Reaches RICEC

We have worked for Kinan, Oceanera, Ganache, Cartoon Network and Saudia Holidays. Our designers work in the same building as the joiners, the CNC and laser cutters, the paint shop, the acrylic team and the large format printers, all inside our own factory, so the plinth under your robot, the engineer's control desk and the backlit wall behind them come from one team and are fitted to each other before anything travels. The whole stand is erected once in our factory as a full trial, with your equipment in its place whenever it reaches us in time. At RICEC the same crew of ours rebuilds it, remains beside you through opening day and clears the space once the show ends, and a kit you intend to use again can wait in our storage. The Touch is spread over more than one location in Saudi Arabia, but every booth we accept is produced in our own factory and fitted by our own crew. We are an independent builder hired by exhibitors for the space they have booked, and we are not an official or approved contractor of Industrial Transformation Saudi Arabia, its organisers or the venue.

Pavilion display area, by The Touch
Pavilion display area
Booth with blue edge lighting, by The Touch
Booth with blue edge lighting
Booth with tall lit tower, by The Touch
Booth with tall lit tower
Arched pavilion with screens, by The Touch
Arched pavilion with screens
Johnson & Johnson MedTech booth, by The Touch
Johnson & Johnson MedTech booth

Questions About a Saudi Industrial Transformation Exhibition Stand

Asked by automation vendors, integrators, software houses and energy companies preparing for late 2027.

When and where is the show in 2027?

From 29 November to 1 December 2027 at the Riyadh International Convention and Exhibition Center, according to the home page and the visitor guide. The exhibition opens at 11:30 AM on the first day and at noon on the other two, and closes at 9:30 PM.

Why do some official pages show 2026 dates?

When we read the site, its about, booking and news pages still gave 30 November to 2 December 2026, while the home page, the visitor guide, the summit page and the Riyadh Exhibitions Company site gave the 2027 dates. No notice on the site explains the difference. Ask the sales team to confirm your edition in writing before you book anything.

Is this the Saudi Industrial Expo?

No. Saudi Industrial Expo is run by dmg events and is set for 13 to 15 September 2027, also at RICEC. Industrial Transformation Saudi Arabia is the Hannover Messe event run by Riyadh Exhibitions Company with Deutsche Messe, so each show has its own forms and deadlines.

Who organises it and who comes?

Riyadh Exhibitions Company and Deutsche Messe, with the Ministry of Industry and Mineral Resources as patron. The organiser aims at senior decision makers from government and industry, investors, factories, EPC contractors and system integrators. Visitors under 16 are not admitted.

What can be exhibited?

Six sectors: automation and advanced manufacturing; digitalisation, AI and innovation; additive manufacturing; intralogistics and warehousing; wireless, 5G and industrial IoT; and energy solutions with smart grids. The exhibit profile page lists detailed items under each, from robotics and machine vision to digital twins and hydrogen.

What space can we book?

The request form offers bare floor or a stand fitted by the organiser, in sizes from 9 to 27 square metres or larger. The site publishes neither prices nor the contents of the fitted stand, so ask for both before choosing.

Must we use an approved stand contractor?

The open site names no contractor list. If the organiser keeps one, check it with the organiser in writing before signing with any builder. We work as an independent builder and prepare the drawings and documents the organiser requests from the builder an exhibitor appoints.

Can a robot run live on our booth?

Usually yes, within the organiser's safety conditions for moving machines, which you should ask for in writing. We design the booth around the cell, its guarding and its viewing lines, and assemble it in our factory first so the space works before it ships.

Is there still time for a custom booth or an island?

Yes, by a wide margin. Count 6 to 8 weeks between brief and opening for a custom booth and 8 to 10 for an island or a double deck, against an opening that is more than a year away. The early months are best used for shipping and clearing the demo equipment.

What do you need from us to quote?

The space size and its open sides, the equipment list with dimensions, weights, power and network needs, and the manual once you have it. An itemised quote follows within 24 hours, and where transport applies it is a named line in that quote.

Exhibiting at Industrial Transformation Saudi Arabia 2027?

Send us your space size, the open sides and the equipment that must run on the booth. For a Saudi Industrial Transformation exhibition stand you receive, within 24 hours, an itemised quote, a first concept and a dated plan that ends on 29 November 2027. Call 0567069088 or message us on WhatsApp.

1
Powered by Joinchat
Call now WhatsApp