Saudi Industrial Expo comes back from 13 to 15 September 2027 at the Riyadh International Convention and Exhibition Centre, open from 4 PM to 10 PM on all three days, with dmg events as organiser. The organiser calls it the Kingdom's dedicated event for industrial expansion, and it shares its dates and its venue with Saudi Wood Expo. On its visitor page it names the people it expects: procurement directors, plant managers, engineering leads and heads of operations who hold a mandate to buy. A Saudi Industrial Expo exhibition stand therefore speaks to a narrow and practical audience. These visitors walk the aisles to judge a spindle, a gripper, a gauge or a cable by watching it work, then ask about delivery, spares and service. Seen from the middle of November 2026, almost ten months separate you from opening day, so no booth format is ruled out yet, a custom build around a running machine included. This page sets out what the organiser publishes, the questions its manual alone can settle, a booth format for each product family and a schedule worked backwards from 13 September.
Every line in these tables comes from the organiser's own pages, read on the date printed under the sources. The open site carries no exhibitor manual, no stand packages and no price list, so no booth rule here repeats their wording. Two details on those pages disagree with each other, and the table flags both instead of picking one. The same rule, official page first, sits behind every date in our exhibitions calendar.
| Dates | 13 to 15 September 2027 |
|---|---|
| Venue | Riyadh International Convention and Exhibition Center |
| City | Riyadh |
| Organiser | dmg events |
| Sector | Industry and manufacturing |
| Official page | saudiindustrialexpo.com |
| Daily hours | 4 PM to 10 PM on each of the three days, as printed across the official site |
|---|---|
| Previous edition | Held from 30 August to 1 September 2026 at Riyadh Front Exhibition and Conference Center, according to the overview page, so the 2027 show moves to another building |
| Venue note | The text of every page names RICEC for 2027, while the map link in the site footer still opens Riyadh Front. Plan on RICEC and have the venue confirmed in your space contract |
| Edition number | The home page says the 2027 show returns for its 2nd edition, while the exhibit and overview pages call the 2026 show the second. Ask the organiser before you print an edition number on anything |
| Runs beside it | Saudi Wood Expo, on the same dates in the same venue and from the same organiser, for wood and woodworking |
| Scale the organiser gives | 35,000+ professionals and exhibitors from 50+ countries, both counted across the co-located shows rather than for the industrial show on its own |
| Showcase categories | Machinery and automation; additive and advanced manufacturing; smart factory technology, automation and robotics; tools and workholding; machine components, parts and accessories; safety, health and industrial protection; rubber, wire and cabling; measuring, testing and quality control; maintenance, repair and industrial services; industrial materials and chemicals other than plastics; support systems and industrial infrastructure |
| Who the organiser expects | Procurement directors, plant managers, engineering leads and operations heads, from manufacturing, industrial processing, chemicals, machinery, automation, logistics and supply chain |
| Market the organiser cites | More than 11,000 factories operating in the Kingdom, with a target of 36,000 by 2035 |
| Exhibitor list | The site links a 2026 directory hosted on the Saudi Wood Expo exhibitor portal, searchable by product sector, country and business type, with no filter that separates the two shows |
| Admission | Free for trade and industry professionals. Nobody under 18 is admitted |
Official sources we read: Saudi Industrial Expo, organiser home page, Why exhibit, Why visit, Show overview, Book your stand, Co-located event, Saudi Wood Expo, home page, Exhibitor directory 2026. Sources last checked: 16 November 2026.
Space at Saudi Industrial Expo is requested through an enquiry form that goes to a named sales manager, and the building rules reach exhibitors once they have contracted. We found no manual, no service order form and no list of contractors on the open pages, so the points below are questions, not quotations. Each one changes the drawing of a booth that carries working equipment, and the 2027 manual is where the answers live. If dmg events keeps a list of approved or registered stand contractors for this show, get the organiser's written answer on whether your builder must be on it before any builder, ourselves included, receives a signed order.
The 2026 show stood at Riyadh Front and the 2027 show is announced at RICEC. Clear heights, pillar positions, the width of the doors used for move in and the location of service points all belong to the building. Ask for the hall plan with your space marked on it before a single line of the layout is drawn.
A machining centre or a press sets its whole weight down on a few feet. The venue states what its floor bears and whether spreader plates go under heavy pieces. Put the weight and the footprint of each exhibit in your first message to the organiser, and let the booth platform follow the answer.
The organiser speaks of live demonstrations across the show floor, yet each comes with conditions. Ask what applies to moving parts, coolant, lasers, welding, dust and noise, and whether guarding, an emergency stop or a demonstration schedule has to be submitted. The reply decides how much of your floor becomes a protected zone.
Industrial equipment often needs three phase power, and some of it needs compressed air. Both are ordered from the organiser or the venue by a deadline, in quantities taken from the data plate of each machine on the booth. A late order may carry a surcharge or go unserved, and that call is theirs to make.
Heavy exhibits usually enter the hall before the booth is built, in a slot the organiser allocates, lifted by an operator the venue accepts. Ask for the move in sequence early, because the platform and back wall of a machine booth are put up around a machine that is already standing in place.
Industrial materials and chemicals form one of the showcase categories. Whether sealed samples may be displayed, whether any open container is allowed and which safety data sheets the organiser wants on file are questions for the manual. Display packs filled with an inert substitute are a common way round the rules.
Drawings, load notes and any document dmg events or RICEC requests are prepared on our side; granting approval is for them alone. Which form falls due in which week of the final month is listed in our exhibitor checklist.
The right format depends less on budget than on what you exhibit: a machine that must run, a range of parts that must be handled, or a service that has to be explained. These six booth formats cover most exhibitors at this show, from the lightest build to the heaviest.
The organiser's panels and fascia become a trade counter: printed back walls arranged by product family, a slatted wall for cutters or fittings, a lit counter and a lockable cabinet. Allow 2 to 3 weeks; for a distributor sounding out demand among factory buyers it is often enough.
On 9 or 18 square metres, a single benchtop unit, a gauge or a small collaborative robot on a steady plinth tells the whole story, with a screen beside it for the larger range. A low rail and a marked standing line keep the demonstration safe and easy to follow from the aisle.
Graphics, lighting and shelving hang on a frame system that is used again and again, and a heavy bench from our factory is fitted into it so visitors can try a tool, a fixture or a meter themselves. Fresh graphics need 2 to 4 weeks, and between shows the kit waits in our storage.
From around 36 square metres the booth is planned around the exhibit: a reinforced plinth or a clear floor zone for the machine, a viewing edge along the aisle, a parts and service counter behind it and a closed room for the talk about price. Count 6 to 8 weeks between the brief and the opening.
An integrator sells a working line, not a single product. An island lets a robot cell, a conveyor and a vision station run as one sequence seen from four sides, with the control panel turned to an aisle and the engineers' table kept out of the noise. Allow 8 to 10 weeks.
A foreign manufacturer and its local distributor often exhibit together. One roofline, one reception and one meeting room, with the maker's name on the machines and the distributor's name over the service desk, tells the buyer who supplies the equipment and who supports it.
Each row below is dated backwards from 13 September. None of them has passed yet as of November 2026, a rare position worth using, because a booth built around a machine depends on facts that arrive slowly: the floor load, the delivery slot, the power order. Fix the booth's exhibit list first. A machine shipped from abroad has its own lead time and must reach the hall in the slot the organiser gives, not a day after it. Our guide how long an exhibition stand takes walks through what happens at each step.
| Date | Stage | Status |
|---|---|---|
| 19 July 2027 | The brief, the space contract and the exhibitor manual in hand: a custom stand starts here | Ahead |
| 2 August 2027 | Design approved, and drawings sent to the organiser where it asks for them | Ahead |
| 16 August 2027 | Last sensible start for a modular stand with new graphics | Ahead |
| 23 August 2027 | Graphics go to print on the final panel sizes | Ahead |
| 30 August 2027 | Full test assembly in the factory, and the last start for a rental kit from stock | Ahead |
| 6 September 2027 | Transport booked for the build window the organiser sets | Ahead |
| · | Installation in the hall, inside the hours written in the exhibitor manual | Per the exhibitor manual |
| 13 September 2027 | Opening day | Ahead |
| 15 September 2027 | Closing, then dismantling in the organiser's window | Ahead |
What is still realistic for this edition · 305 days to openingThere is time for a custom stand on the normal schedule, provided the design is approved on its date.
Status worked out on 12 November 2026.
A plant manager does not buy from a photograph. The booths that keep these visitors make it easy to watch a product work, to check a figure and to talk about support after the sale. Each card below is one booth habit that does this.
A machine cycling in the air proves little. Let it cut, form, print, measure or pick something real, and hand the finished piece to the visitor with its cycle data on a printed card. A part on the meeting table outlasts the demonstration by weeks.
Clear acrylic screens shaped to the outline of the machine, rails at a set distance and a marked floor line let visitors stand close without standing in danger. The working area stays visible from every side of the booth, which is the point of bringing the machine at all.
Cutters, holders and workholding look alike from the aisle. Group them by the operation they serve, label each slot with its code and its material, and keep the costly pieces in a lockable glass case next to the counter where someone is always standing.
Gauges, scanners and test instruments need a calm surface. Place the measuring corner far from running machines and aisle traffic, on a heavy table, with a sample part ready to be measured in front of the visitor and the report printed while they wait.
A drum tells nobody what is inside it. Cut sections of each cable, fixed at eye level and labelled with their construction and the standard they meet, answer the engineer's first question before it is asked.
Gloves, harnesses, gas detectors and fall arrest kit read better on forms and fixtures that show how they are worn and fixed, each one beside the standard it meets and a line on the hazard it answers.
For maintenance and repair providers, and for every machine seller, the next question is about support. Give it a counter: your response commitments in your own words, the spares you hold in the Kingdom, a summary of the service contract and a person who can answer.
A full production line rarely fits a booth. A screen beside the demonstrator shows the rest of the process, the plant where it runs and the data it produces, while the machine on the floor stays the centre of attention.
With doors opening at 4 PM, the mornings of show days are free for plant visits and calls. Send personal invitations to the factories on your target list during August, offer each a slot on one of the three evenings, and hold the closed room for them.
Because the show is in Riyadh, our page on exhibition stand builders in Riyadh covers the local side of the work, and if a customer dinner or a distributor launch falls in the same week, see event management in Riyadh. The whole industrial season, each show with its organiser, is laid out in the Saudi exhibitions calendar for 2026 and 2027. What drives the price of each item is set out in exhibition stand cost in Saudi Arabia. Exhibitors who want one kit to tour several shows should look at modular and portable stands, and those planning a full build around their equipment at custom exhibition booths. A meeting level above a machine bay follows rules of its own, explained in double deck stand rules, and lighting polished metal and moving parts without glare is covered in exhibition stand lighting.
Caught in the booth brief, these cost nothing. Found in the hall during build up, they cost a great deal.
Equipment switched off all evening makes visitors wonder why. If it cannot run in the hall, say so on the booth, play it running on a screen beside it and put a part it made within reach.
Weight, footprint, power and air feed the floor plan, the platform and the service orders. Arriving with them a few weeks before opening forces a redraw of the booth and pushes every order past its deadline.
The organiser expects procurement directors and operations heads as well. They ask about lead time, stock in the Kingdom, training and payment terms, and those answers belong on the walls and at the counter, not only in a brochure.
The 2026 show was held in another building. A layout drawn for Riyadh Front may face the wrong aisle or meet a different height rule at RICEC. Keep the kit if it still serves, but draw the plan again on the 2027 hall plan.
Nobody negotiates a production line beside a running spindle. Without a closed room, or at least a screened table, the serious buyer leaves to talk later, and often talks to someone else.
Saudi Wood Expo runs in the same venue on the same days. Suppliers of tooling, machine parts, safety equipment or finishing systems may meet buyers from both shows, which should shape the visitor invitations and the side of the booth that faces the busiest aisle.
We have worked for Al Khaleej Al Gharbiya, Oceanera, Ganache, Saudia, Kinan and Johnson & Johnson MedTech. Our designers sit with our CNC and laser cutting, our joinery and paint, our acrylic fabrication and our large format printing in our own factory, so the machine plinth, the guard screens, the tool wall and the lit fascia of one booth are made by the same people and checked against each other. Before anything leaves, the whole booth is put together in the factory exactly as it will stand in the hall, then taken down and packed. In the hall our own crew puts it up, remains on hand for the first day and comes back after the close to take it down. The Touch has more than one location in the Kingdom, and your project is built in our own factory and installed by our own crew. Our client is the exhibitor, building on the space it has booked from dmg events: The Touch is an independent stand builder and holds no official role at Saudi Industrial Expo, with its organiser or with RICEC. Where transport applies, it is a named line in the quote.





What machinery makers, distributors and marketing teams ask us while they plan a booth for September 2027.
The official site gives 13 to 15 September 2027 at the Riyadh International Convention and Exhibition Centre, with the halls open from 4 PM to 10 PM every evening. The 2026 show was held at Riyadh Front, so check the venue on every document you carry over.
dmg events organises it, and Saudi Wood Expo runs on the same dates in the same venue. The organiser counts 35,000+ professionals and exhibitors from 50+ countries across both shows together. Booth space is requested through the enquiry form on the official site.
The official site links a 2026 exhibitor list hosted on the Saudi Wood Expo exhibitor portal, searchable by product sector, country and business type. It does not separate the two shows, so read it as everyone who exhibited across both. The 2027 list appears when the organiser publishes it.
We could not find it, nor the service order forms or deadlines, on any open page of the site: dmg events sends them once the space contract is signed. Forward it to us when it arrives and the booth drawings follow its rules. No sentence here claims to be its wording.
The organiser mentions live demonstrations across the floor, so working equipment belongs to this show. The conditions, from guarding and emergency stops to noise, coolant and dust, are set by the manual and the venue. We design the booth around them once you hold the written answer.
Far from it. Our normal schedule for such a booth is 6 to 8 weeks between brief and opening, 8 to 10 for an island or a double deck, and almost ten months still separate November 2026 from the show. The real constraint is the machine: fix its shipping and its delivery slot before the booth design is frozen.
Start from what must run and how many people should watch it at once. On 9 square metres a benchtop demonstrator and a counter fit, on 18 a bench and a small meeting table, and from 36 a machine bay, a service counter and a closed room can share the space.
Usually one, with a bay for each maker and a single reception, service desk and meeting room. The buyer is choosing who will deliver spares and support, and one booth shows that you do it for every brand you carry.
Modular frames carry over with a fresh set of graphics, which takes 2 to 4 weeks, and a custom booth kept in our storage can be adapted. The layout must be redrawn for the 2027 venue, because the hall, its rules and its aisles are not those of Riyadh Front.
How many square metres you booked and how many sides face an aisle, every exhibit with its weight, footprint, power and air, and the manual once dmg events sends it. The itemised price comes back within 24 hours, and where transport applies it is a named line in the quote.
Tell us the size of your space, which sides open to the aisle and which machines or products you will bring, with the data of anything that has to run. An itemised quote follows within 24 hours, together with a first sketch of the booth and a build plan worked back from 13 September. Call 0567069088, or use the WhatsApp button below.
Most projects here combine more than one service. This is the full range, with the ones closest to this page first.