Riyadh · 31 May to 2 June 2027 · RICEC

Saudi Coatings Show Exhibition Stand 2027: Booths Where Colour Reads True

The Saudi Arabia Coatings Show, which most buyers simply search as the Saudi Coatings Show, comes to Riyadh from 31 May to 2 June 2027 at the Riyadh International Conference and Exhibition Center (RICEC). dmg events runs it as part of its Coatings Group and describes it as the only trade exhibition in the Kingdom devoted to coatings alone. The 2025 edition stood at Dhahran Expo in Dammam, so 2027 brings a new city and a new hall at once. A Saudi Coatings Show exhibition stand faces an unusual jury: chemists, formulators, colour specialists and plant managers who study a painted wall the way a jeweller studies a stone. Every panel, every lamp and every tin on your booth is read as evidence about the product. This page gathers the official facts, the questions only the organiser can settle, the booth formats suited to raw material, equipment and paint exhibitors, and a stage by stage schedule worked back from the opening.

31 Mayopening day 2027
10 AM to 3 PMhours on the final day, per the organiser
170+exhibiting brands the organiser cites
24hto an itemised booth quote

The Saudi Arabia Coatings Show 2027 in Brief

We took the dates, the daily hours, the venue and every figure below from saudiarabiacoatingsshow.com and from the show list dmg events publishes. Beyond a stand enquiry form, that site holds nothing for builders: the manual, the packages and the build regulations are absent, so this page quotes none of them. The rest of the season, checked against official pages in the same manner, sits in our calendar of Saudi exhibitions.

Saudi Arabia Coatings Show

Dates31 May to 2 June 2027
VenueRiyadh International Convention and Exhibition Center
CityRiyadh
Organiserdmg events
SectorCoatings
Official pagesaudiarabiacoatingsshow.com
Daily hours31 May and 1 June from 10 AM to 6 PM, then 2 June from 10 AM to 3 PM, as the organiser lists them
Part ofThe Coatings Group, which the organiser says has gathered the coatings industry for more than 30 years through over 100 events across Asia Pacific, the Middle East and Africa
Rhythm and last editionThe group calls its shows biennial. The previous Saudi edition ran from 13 to 15 May 2025 at Dhahran Expo in Dammam, according to the official exhibitor list
Scale the organiser gives5,000+ industry professionals and 170+ exhibiting brands, in a Saudi paint and coatings market it values at US$ 1.73bn
Product sectorsChemicals and raw materials, laboratory and packaging equipment, testing and measuring equipment, plant and machinery, and other coatings products such as colour cards and colour forecasting
Visitors, as the organiser describes themManufacturers, raw material suppliers, buyers, distributors, formulators and technical specialists, from construction, printing and packaging, architecture, furniture, marine, oil and gas, and automotive
Programme on the floorChemTalks, a technical programme of presentations and live demos by exhibitors, and Colour Mixology, a colour matching competition powered by Trycolors and open to every attendee
Organiser guidance on standsIts sustainability page asks exhibitors to choose modular, reusable structures over single use builds and to move brochures and lead capture to digital
AdmissionNo charge for trade and industry visitors, and nobody under 18 is let in

Official sources we read: Saudi Arabia Coatings Show, organiser home page, Why exhibit, Why visit, Product sectors, Book a stand, ChemTalks, Colour Mixology, About Coatings Group, Sustainability initiatives, Contact us, Exhibitor list of the 2025 edition, dmg events, list of events. Sources last checked: 16 November 2026.

What the Organiser Settles and What to Ask First

The official site books space through an enquiry form and names a sales team and a head of operations. It publishes neither an exhibitor manual nor a list of approved stand contractors. For a coatings booth, where liquids, odours and machinery meet a public hall, the rules that matter sit in documents exhibitors receive after they contract. Put these points to dmg events in writing while the design is still open. Forward us their replies with your brief and the drawings follow them.

Liquids and flammable product in the hall

Solvent borne paints, thinners and many resins are flammable, and halls normally control what enters, in what quantity and in which container. Ask whether open tins are permitted, whether safety data sheets must be filed ahead of the show, and whether samples have to stay sealed throughout.

Tinting, mixing and spraying on the booth

A dispenser filling a can or a disperser turning a batch persuades a buyer faster than any brochure, and it is also the item most likely to need written consent. Ask what may run live and at which hours, and whether spraying is excluded, so the demo can be designed as a closed cabinet or as a film from the start.

Heavy machines and their way in

Mills, fillers, labellers and weathering cabinets are heavy and travel crated. Ask for the floor load of your RICEC hall, the delivery route and door sizes, who supplies forklifts, and when machinery may enter compared with the stand build.

Power, water and compressed air

Shakers, dispensers and test cabinets each draw current, and some instruments want a steady supply of their own instead of a shared socket. A salt spray or humidity cabinet can also need water and a drain. Order every service from a written load list, and ask for the deadline and the charge for a late order.

Registered builders and their paperwork

Should the organiser hold a register of approved stand contractors, the exhibitor has to check that register with dmg events, in writing, before any builder is signed. Ask too what the builder has to submit, such as drawings, insurance and passes, and by when.

A short final day and the pack out

Doors shut at 3 PM on 2 June. Ask when dismantling may start, how returned samples and part used tins must leave the hall, and how chemical waste such as soiled rags is collected, since it cannot go into the ordinary bins.

Our part is the drawings, the service load list and whatever forms dmg events or RICEC request; granting approval stays with them. For the last month, task by task, use our exhibitor checklist.

Booth Formats for Raw Materials, Equipment and Paint Brands

Exhibitors at this show sell very different things. A pigment house sells a powder, an instrument maker sells a reading, a paint brand sells a colour on a wall. The formats below follow what each booth has to place in front of a formulator. The organiser's own guidance favours modular and reusable structures, which fits a show that returns every second year.

Shell scheme raised to a technical counter

The fitted space handed over by the organiser, turned into a compact technical desk: a printed back wall naming the product families, a shelf of sealed sample jars and a counter with a screen for data sheets. It takes 2 to 3 weeks, which suits an agent bringing a raw material range to Saudi buyers for the first time.

Raw material bar for a small plot

On a plot of 9 square metres, or 18, pigments, resins, fillers and additives sit as a lit wall of sealed jars, each tagged with grade and chemistry, facing a long standing counter where a chemist can talk through a formulation. Drawers under the counter hold spare samples and printed starting formulations.

Colour gallery for a paint brand

Neutral grey walls, a ceiling that blocks the hall light and a controlled source above every colour area. Visitors walk past finished walls and room corners painted in the range, then arrive at a colour card table and a desk for project specifiers.

Machinery floor with a demo area

For dispensers, shakers, dispersers and filling machines: a raised floor that carries the weight and hides the cables, clear service space round each unit, a screened zone where running is allowed, and a calmer pocket for the sales talk where the shakers cannot drown it.

Testing and measurement lab

Built like a clean laboratory: white bench tops, a viewing cabinet, instruments within reach and a wall of exposed test panels. A visitor measures a sample at the bench and watches the reading appear on a screen above it.

Modular kit stored between editions

A reusable frame system that takes new graphics in 2 to 4 weeks, sized for 18 or 36 square metres and kept in our storage between shows. Each edition receives fresh panels and print on the same structure, in line with the organiser's call for reusable builds.

Saudi Coatings Show Exhibition Stand: Counting Back from 31 May 2027

Read the table from the bottom up: it starts at the opening and walks back. Seen from mid November 2026, none of its stages has passed, so a custom booth fits its usual span of 6 to 8 weeks between brief and opening, or 8 to 10 when it is an island or a double deck. Two things take longer than the booth here: consent for any live demo, and the paint panels, which your laboratory must prepare and deliver to our factory before the test assembly. Our guide on how long an exhibition stand takes walks through each step.

Saudi Arabia Coatings Show · 31 May to 2 June 2027

DateStageStatus
5 April 2027The brief, the space contract and the exhibitor manual in hand: a custom stand starts hereAhead
19 April 2027Design approved, and drawings sent to the organiser where it asks for themAhead
3 May 2027Last sensible start for a modular stand with new graphicsAhead
10 May 2027Graphics go to print on the final panel sizesAhead
17 May 2027Full test assembly in the factory, and the last start for a rental kit from stockAhead
24 May 2027Transport booked for the build window the organiser setsAhead
·Installation in the hall, inside the hours written in the exhibitor manualPer the exhibitor manual
31 May 2027Opening dayAhead
2 June 2027Closing, then dismantling in the organiser's windowAhead

What is still realistic for this edition · 200 days to openingThere is time for a custom stand on the normal schedule, provided the design is approved on its date.

Status worked out on 12 November 2026.

What Works on a Coatings Floor

Visitors at this show are trained to mistrust colour and to test claims. A booth wins them over by letting them look, touch and measure under fair conditions.

Light matched to the colour standard

Hall lighting mixes several sources, and a shade that matches the fan deck under one can drift under another. Light every colour panel with high colour rendering lamps of a single colour temperature, keep the hall light off the panels with a ceiling or baffles, and state on the wall which light they are shown under.

A viewing cabinet on the counter

Colour people trust a light booth more than any wall. A small cabinet switching between daylight, shop light and a warm lamp lets a visitor hold the same panel under each source and judge whether two samples keep their match.

Grey around the colour

A saturated brand colour next to a sample throws a cast onto it and fools the eye. Keep the surround of every colour area a quiet neutral grey, and save the brand colours for the fascia and the reception, well away from the panels.

Panels made to be handled

Drawdown cards, sprayed steel panels and boards coated over plaster, timber or concrete each show a different use. Mount them on rails at a slight tilt so gloss and texture catch the light, label each with code, gloss level and substrate, and keep a fresh set in a drawer to swap for the ones that gather fingerprints.

Wet product kept sealed

A tin of paint left open on a counter skins over, smells and invites a spill. Show liquids in sealed clear jars or behind glass, put a drip tray under every container, keep the safety data sheets in a folder on the booth, and leave decanting to the laboratory.

Odour planned out

Solvent smell drifts across an aisle and wears out visitors and neighbours alike. Where a demo uses solvent borne product, keep quantities small and lids closed between uses, and let water borne or low odour products carry the live part of the story.

Test results on the wall

A corrosion claim is answered by a scribed panel taken out of a salt spray cabinet, and a weathering claim by an exposed panel beside an unexposed one. Hang the pairs at eye level with the test conditions printed beneath.

A bench for the formulator

Raw material buyers arrive with a problem in a formulation. Give them a bench with stools, a screen that opens the technical data sheet of every grade, and a chemist ready to sketch a starting point on paper.

A booth surface that survives inspection

Every wall here is examined by people who make paint for a living. Orange peel, runs, brush marks or a ragged edge on the booth itself undo the message. A coat sprayed and checked in the factory, with edges protected in transit, belongs to the pitch.

Read This Before You Write the Brief

This edition stands in Riyadh, so access to the capital's halls and the way a build runs there are covered on our page for exhibition stand builders in Riyadh, and a distributor dinner or a launch evening during show week on event management in Riyadh. Colour temperature, colour rendering and glare on a booth are explained in our guide to exhibition stand lighting. Budget lines, from the floor to the services order, are in exhibition stand cost in Saudi Arabia. A kit meant to come back for the next edition starts from modular and portable stands, and a full build from custom exhibition booths. The other industrial dates of the season are in the Saudi exhibitions calendar for 2026 and 2027.

Mistakes That Cost Coatings Exhibitors Their Leads

Each is cheap to avoid and expensive to leave on the booth, because this audience notices every one.

Showing colour under the hall lamps

Panels lit by whatever the ceiling happens to provide shift in shade, and a colour specialist sees it at once. A consistent range then looks uneven.

Panels from mixed batches

Paint panels sprayed on different days or on different substrates disagree once they hang side by side. Prepare the whole display set together, on one substrate, and inspect it before it ships.

Powders and liquids brought loose

Unsealed pigment stains a white counter and a visitor's sleeve within the hour, and an open solvent tin can end a demo before lunch. Seal whatever can spill, dust or smell.

A machine with no room around it

A dispenser pushed against a back wall cannot be opened, serviced or shown. Leave the access the operator needs on every side, and room for a small crowd to watch without blocking the aisle.

Treating the final day like the first

The last day closes at 3 PM. Meetings booked for that afternoon are lost, and samples, tins and instruments need time to be packed. Put the key appointments on the first two days.

Reusing the 2025 drawing unchanged

The previous edition stood at Dhahran Expo in Dammam. RICEC has its own halls, rules and delivery routes, so a returning exhibitor should redraw the layout even when the kit itself comes back.

Painted, Built and Test Assembled in Our Own Factory

We have worked for Ganache, Oceanera, Gucci Flora, Kinan and Johnson & Johnson MedTech. We operate from more than one location in the Kingdom, and each project is made in our own factory and fitted on site by our own team. Every trade a booth calls for works side by side in that factory, from design and cutting on CNC and laser machines to joinery, painting, acrylic and wide print, so the grey colour walls, the sample rails, the jar shelves and the lit fascia of a coatings booth come from one drawing. The whole booth is put together once in full inside the factory with your panels mounted, which is when the light on every colour gets checked before anything travels. Our crew then builds it in the hall, remains through opening day and takes it down once the show closes. The Touch is an independent builder, hired by exhibitors for the space they have booked; we hold no official role with the Saudi Arabia Coatings Show, dmg events or RICEC.

Cartoon Network booth, by The Touch
Cartoon Network booth
Ascenda booth with neon frames, by The Touch
Ascenda booth with neon frames
Booth with giant juice bottle, by The Touch
Booth with giant juice bottle
Booth with blue edge lighting, by The Touch
Booth with blue edge lighting
Heritage Commission booth with lit frame, by The Touch
Heritage Commission booth with lit frame

Questions About a Saudi Coatings Show Exhibition Stand

What paint makers, raw material suppliers and equipment companies ask while planning for Riyadh.

When and where is the Saudi Arabia Coatings Show 2027?

From 31 May to 2 June 2027 at the Riyadh International Conference and Exhibition Center (RICEC), according to the organiser's site and the dmg events list of shows. It opens from 10 AM to 6 PM on the first two days and from 10 AM to 3 PM on the last.

Is this the same show that was held in Dammam?

Yes, it is the same series. The official 2025 exhibitor list places that edition at Dhahran Expo in Dammam from 13 to 15 May 2025, and the site announces the 2027 return in Riyadh. The hall, its rules and the logistics are therefore new for everyone.

Who visits the show?

The organiser lists manufacturers, raw material suppliers, buyers, distributors, formulators and technical specialists, working in construction, printing and packaging, architecture, furniture, marine, oil and gas, and automotive. Trade visitors pay nothing to enter, and under 18s are turned away.

May we bring real paint and open tins?

That decision belongs to the organiser and the venue, and it is written in the exhibitor manual, which is not on the open site. Flammable liquids are usually controlled in exhibition halls, so plan for sealed containers and keep the safety data sheets on the booth. We design the display so it still works if open product is refused.

Can we run a tinting or mixing demonstration?

A running machine is often allowed under conditions, but ask dmg events in writing before the design is frozen. The answer decides the power order, the space around the machine and whether the demo sits behind a screen. Spraying is the most likely to be restricted, so a closed cabinet or a film is a sensible fallback.

How do we keep our colours true on the booth?

Screen out the hall light, put high colour rendering lamps of one colour temperature over the panels and keep their surroundings neutral grey. A viewing cabinet on the counter lets visitors compare panels under several sources. We set and check the lighting with your panels mounted during the test assembly in our factory.

Is The Touch an approved contractor of the show?

No, and we never present ourselves as one. The official site publishes no list of approved stand contractors, so if the organiser keeps such a list, confirm it with dmg events in writing before you sign with any builder.

What size suits a raw material supplier?

A plot of 9 square metres, or 18, is often enough: a wall of sealed samples, a bench for technical talk and storage for spares. Equipment makers usually need 36 square metres or more once each machine has its service space around it.

Is there still time for a custom booth?

Yes. Allow 6 to 8 weeks between brief and opening for a custom booth, and 8 to 10 for an island or a double deck. Begin sooner than that if you plan live demos or heavy machinery, because consents and sample panels bring their own lead time.

What should we send to get a price?

The space size and its open sides, the products and machines to be shown, anything that must run live, and the exhibitor manual once it reaches you. An itemised quote comes back within 24 hours, and where transport applies it is a named line in that quote.

Exhibiting at the Saudi Arabia Coatings Show 2027?

Tell us the size of your space, which sides open onto an aisle and what has to be seen, measured or running on the booth. An itemised quote follows within 24 hours, together with an early concept sketch and a dated plan that runs back from 31 May. Call 0567069088 or message us on WhatsApp.

1
Powered by Joinchat
Call now WhatsApp