Riyadh · 12 to 14 January 2027 · King Abdulaziz International Conference Center

Future Minerals Forum Exhibition Stand 2027: Booths Built for Delegations

The Future Minerals Forum returns to Riyadh from 12 to 14 January 2027, and the organiser's site names the King Abdulaziz International Conference Center as its venue. This is the sixth edition of a forum organised by the Ministry of Industry and Mineral Resources, and its own brochure describes it as more than a conference or an exhibition: ministers, mining chief executives, investors and government delegations meet there, and the show floor serves those meetings. A Future Minerals Forum exhibition stand is therefore judged differently from a booth at a trade fair. Visitors step out of one session with a short gap before the next, often as a group with an escort and a photographer, and what they need is a calm reception, a place to sit away from the aisle, and one clear statement of what your country or company brings to the mineral value chain. Counted from mid November 2026, opening day is about two months away: a single level custom booth is still possible if the brief lands this week, while an island or a double deck is already tight. This page gives the official facts, the decisions that belong to the organiser, the booth formats that fit, and a countdown from opening day.

12 Janopening day 2027
274exhibitors in 2026, per the ministry
6 to 8 weekssingle level custom booth, brief to opening
24hfor an itemised booth quote

Future Minerals Forum 2027 at a Glance

The dates, the venue and every figure in the table are read from the organiser's own site, its 2027 brochure and its country pavilion documents, and the 2026 results come from the ministry's closing statement. The exhibitor manual is not on the open site, so no line below is taken from it. Our exhibitions calendar follows the same rule: a date goes in only from an organiser, a venue or a ministry page.

Future Minerals Forum

Dates12 to 14 January 2027
VenueKing Abdulaziz International Conference Center, Riyadh
CityRiyadh
OrganiserMinistry of Industry and Mineral Resources
SectorMining and minerals
Official pagefuturemineralsforum.com
Venue the organiser names for 2027King Abdulaziz International Conference Center (KAICC), Riyadh, on the forum page, in the brochure and in the pavilion documents
EditionThe sixth. The forum was launched in 2022
What the show floor is calledThe International Exhibition, held with the National Country Showcases alongside the conference programme
Zones the organiser describesIndoor exhibitors and country pavilions, a Mineral Exploration Hub for junior exploration companies, a Hub of Excellence for technology organisations, and an outdoor exhibition of heavy duty trucks and terrain vehicles with live demonstrations
Who exhibitsThe brochure lists sectors that run from government, mining and exploration, refining and processing, engineering, equipment and tools to logistics, consulting, data systems, automation and sustainability
Audience the brochure promises exhibitorsAround 20,000 attendees from more than 160 countries
The 2026 edition, per the ministry21,500 participants, 274 exhibitors, official country pavilions, and 132 agreements and memoranda of understanding signed over the three days
Published programme hoursSessions start at 10:00 each day, and the main programme runs to 17:30 on the first two days. The exhibition is listed all day on all three days, and official dinners begin at 19:00 on 12 and 13 January
Government partner packagesThe funding matrix for government partners and hosted pavilions lists a pre-built stand of 45 square metres for an Associate Government Partner and 72 square metres for a Principal Government Partner, in the zone it calls the Global Arena
Country pavilion locationsLimited, and allocated on a first confirmed basis, in the words of the country pavilions flyer
MeetingsThe brochure presents a meeting platform named FMF Global Connect, and the funding matrix mentions one to one meetings in a Connect Lounge
Space enquiriesThe brochure gives a single email address for sponsorship and exhibition enquiries, and the event map links an interactive floor plan

Official sources we read: Future Minerals Forum, official home page, FMF 2027 forum page and agenda, FMF 2027 official event brochure (PDF), Country Pavilion page, Country pavilions flyer (PDF), Funding matrix for government partners and hosted pavilions (PDF), Event map, Sponsors and partners, Ministry statement closing the 2026 edition, Contact page. Sources last checked: 13 November 2026.

Decisions That Belong to the Organiser, and What to Ask

The forum's site publishes the brochure, the country pavilions flyer and a funding matrix for government partners, and it takes sponsorship and exhibition enquiries by email. The exhibitor manual is not posted publicly, so this section quotes no build rule. It names the points that shape a booth at a government forum and that only the manual for the 2027 edition can settle. Send it with your brief and we design to it.

Accreditation for the build crew

A forum attended by ministers is a secured site. Organisers of such events commonly ask for the name and identity details of every crew member, and the plate and driver of every vehicle, well ahead of the booth build, and admit nobody who is not on the list. Ask for the form and its closing date before anything else, because a late change of crew may not be accepted.

A conference centre, not a trade hall

The venue the organiser names is a conference centre. Door sizes, the route from the loading point to your space, the floor loading under heavy samples or a model, and what may be fixed to the floor are questions for the manual and the floor plan. A booth is drawn in sections that pass the narrowest door on its route.

What a pre-built package contains

The government partner packages list the stand as pre-built. Ask for a drawing of what is handed over: walls, floor, fascia, lighting, furniture and power. Ask too what an exhibitor may add or replace. The answer decides whether your work is graphics and display cases inside the organiser's structure, or a booth of your own.

A ceiling and a door on the meeting room

A private room is the centre of a booth here, and a room is private only with a door and a ceiling. Enclosed and covered spaces are usually subject to fire safety conditions and prior approval. Ask what the manual allows before the layout is fixed.

Hospitality and who may serve it

Saudi coffee, dates and water for senior guests are expected. Venues often reserve catering for their own supplier and set rules for serving on a booth. Ask who may serve, what may be brought in, and whether a water point can be ordered.

Signings, filming and the entry of samples

The organiser runs its own stages, a media centre and a television studio inside the venue. Ask whether an agreement may be signed or announced on your booth, whether its media team must be told, and what sound level is allowed. Mineral samples raise one more question: how they enter the site, and who answers for them overnight.

Drawings and paperwork requested by the organiser and the venue are prepared by us, and our crew and vehicle details go in on the organiser's form. Approvals and passes are theirs to grant. The forms of the final month are listed one by one in our exhibitor checklist.

Booth Formats for Countries, Producers and Service Firms

Country pavilions and national mining companies stand beside service firms on compact plots, and each has a different job to do. A Future Minerals Forum exhibition stand can be a whole national pavilion or a few square metres for a consultancy. These are the booth formats we would put forward, with what each can realistically achieve.

Country pavilion

A national header seen from the aisle, a reception, a wall map of the country's mineral belts and licence rounds, a bay for each agency or national company, and a closed room where the delegation receives its counterparts. Where the package comes pre-built, the work is the graphics, the display cases and the furniture plan inside the organiser's structure.

Booth for a national mining company or a major producer

A statement wall, a model or map of the flagship project in the centre, a screen wall for the project film, and a majlis for guests beside a second, smaller meeting room. As an island or a double deck this takes 8 to 10 weeks, so for January 2027 it is drawn on a single level.

Meeting booth for an investor, a bank or a fund

Most of the booth is closed: a quiet branded front with a reception desk, and behind it rooms with doors where financing terms are discussed. There is no product to show, so the wall materials, the seating and the light do the talking.

Compact booth for a service firm

Consultancies, laboratories, drilling contractors and software houses usually take 9 or 18 square metres. One sentence that says what you do and for whom, a single screen, a single object in a lit case, and seats for a short talk. A modular booth with new graphics does this in 2 to 4 weeks and returns to our storage for the next show.

Unit in the Mineral Exploration Hub

The organiser gives junior exploration companies a zone of their own, aimed at investors. Ask what the unit includes before planning anything. What an explorer usually adds to a small booth is specific: the project map, one tray of drill core, and a single page of figures an investor can photograph.

Outdoor exhibit for heavy equipment

Outside, the machine is the display. Around it you need a branded surround, a shaded point to receive guests, and a short walkway that brings visitors from the building to the vehicle. Anchoring, wind loads and ground protection for any outdoor structure are set by the manual.

Future Minerals Forum Exhibition Stand: the Countdown to 12 January 2027

The table counts back from opening day. In mid November 2026 the current row is the one where a custom booth starts: on a single level it takes 6 to 8 weeks from brief to opening, so the brief has to arrive now and the design has to be approved on its date. An island or a double deck needs 8 to 10 weeks, which makes a single level the realistic choice for this edition. A modular booth with new graphics needs 2 to 4 weeks and a rental kit from stock 5 to 10 working days, so both remain open into December. The stage most often missed at a government forum is the list of crew and vehicles, which closes on the organiser's date and not on the builder's. Each stage is explained in how long an exhibition stand takes.

Future Minerals Forum · 12 to 14 January 2027

DateStageStatus
17 November 2026The brief, the space contract and the exhibitor manual in hand: a custom stand starts hereThis week
1 December 2026Design approved, and drawings sent to the organiser where it asks for themAhead
15 December 2026Last sensible start for a modular stand with new graphicsAhead
22 December 2026Graphics go to print on the final panel sizesAhead
29 December 2026Full test assembly in the factory, and the last start for a rental kit from stockAhead
5 January 2027Transport booked for the build window the organiser setsAhead
·Installation in the hall, inside the hours written in the exhibitor manualPer the exhibitor manual
12 January 2027Opening dayAhead
14 January 2027Closing, then dismantling in the organiser's windowAhead

What is still realistic for this edition · 61 days to openingThere is time for a custom stand on the normal schedule, provided the design is approved on its date.

Status worked out on 12 November 2026.

What Works on the Forum Floor

Nobody comes here to collect brochures. Visitors leave a session with a short gap before the next one, and a booth earns its space by making a senior conversation easy to start and private to finish.

A reception that knows who is expected

One desk, and a host who speaks Arabic and English, holds the appointments of the day and walks a guest to the room instead of pointing at it. A minister's party does not queue, so the front of the booth stays open and uncluttered.

A room that really closes

Walls to the height the organiser allows, a door, and a soft floor with lined walls so that voices stay inside. Seat it for a delegation, not for a sales call: the principals facing each other, their advisers behind them, and a chair for an interpreter.

One map or model as the booth's statement

A map of licence areas, a model of a mine or a plant, or the value chain from ore to finished product. Make it large enough for a whole group to gather around, and give it lighting of its own. A scale model comes from a specialist model maker, and its plinth is built to the maker's drawing.

A value chain that reads both ways

Arabic is read from the right and English from the left, so a process drawn left to right is read backwards by half of your guests. Draw the chain from top to bottom, or as a ring, and caption every step in both languages at the same size.

Core and specimens in lit cases

Drill core stays in its tray, labelled with the project, the hole and the depth. Mineral specimens sit on individual mounts under narrow, cool light, behind glass that locks. Rock is heavy: the plinth is built for the weight, and the case is fixed to it.

A screen wall that works without sound

Guests arrive halfway through the film and leave before it ends. Cut it into short chapters, subtitle it in Arabic and English, and have it produced to the proportions of the wall. The sound stays off unless the organiser allows otherwise.

Hospitality at the pace of the guest

Senior guests are served seated: Saudi coffee, dates and water, brought by a host and cleared quietly. Plan a concealed service point on the booth, behind the meeting room, and plan it inside the catering rules of the venue.

Room for a signing or an announcement

Keep part of the booth ready for it: a table that can be brought forward, a backdrop that carries both names at head height so they stay in a tight photograph, clear floor for photographers, and light on faces. Walk through it once with your protocol team before opening day.

A diary tied to the programme

Traffic follows the agenda: the aisles fill in the breaks and at midday, and thin out during the plenaries. Put the whole team on the booth for the breaks, book meetings ahead through the forum's meeting platform, and keep the diary at reception.

Read Next: Riyadh, Budget and Lead Time

The forum is held in Riyadh, so the practical side of building in the city, from venue access to the install team, is on our page about exhibition stand builders in Riyadh, and a delegation dinner, a reception or a signing ceremony held around the forum is covered on event management in Riyadh. The other conferences and industrial shows of the season, each with its organiser, are in the Saudi exhibitions calendar for 2026 and 2027. To plan the budget line by line, read exhibition stand cost in Saudi Arabia. With about two months in hand a reusable frame is often the safer route: start from modular and portable stands, and for a full build see custom exhibition booths. If a second level is on the table for a later edition, read double deck stand rules, and for display cases, maps and meeting rooms there is exhibition stand lighting.

Mistakes Exhibitors Make at a Ministerial Forum

Each of these comes from treating the forum as a trade fair. None is expensive to avoid.

Building a product counter

Shelves of brochures and a row of products suit a buyer who is comparing suppliers. The visitor here is deciding whom to meet. Give the booth to the statement, the reception and the room.

Meetings held in the aisle

With no private place, a conversation about a licence or a financing stops at pleasantries. Even a compact booth can screen off a corner with seats where a passer-by cannot listen.

Arabic added at the end

A booth with English artwork and Arabic squeezed underneath, or translated by machine, is noticed at once by the hosts of the forum. Set both languages together from the first layout, and have the official names of ministries and companies checked by someone who uses them.

Samples with no plan behind them

Core and specimens that arrive loose, unlabelled or late end up on a table at the back of the booth. Decide early what travels, how it clears entry to the site, who holds the case keys, and where it is kept at night.

The crew list sent late

At a secured venue a missing name stays outside the gate, and the booth goes up short handed. The list of crew and vehicles goes in by the organiser's deadline, and the people on it are the people who come.

An empty booth at the break

Staff who all attend the same session come back to find the busiest moment of the day already over. Agree a rota against the agenda, so that the reception and the room are staffed when the session halls empty.

One Team, from Our Factory to the Forum

Our stands and displays have stood for Kinan, the Heritage Commission, Saudia Holidays, Johnson & Johnson MedTech and Cartoon Network. Under one roof we design, cut by CNC and laser, do the joinery and the paint, work the acrylic and print in large format, so the map wall, the display cases and the meeting room of one booth come from one team. Every booth is fully test assembled in our own factory before it ships, then installed by our own team, who stay for the opening and dismantle after the close. We have more than one location in the Kingdom, and where transport applies it is a named line in the quote. We are an independent builder working for exhibitors on the space they have booked. We are not an official contractor of the Future Minerals Forum, of the ministry or of the venue.

Heritage Commission · exhibition stand, by The Touch
Heritage Commission · exhibition stand
Johnson & Johnson MedTech booth, by The Touch
Johnson & Johnson MedTech booth
Ascenda booth with neon frames, by The Touch
Ascenda booth with neon frames
Heritage Commission · edge lighting, by The Touch
Heritage Commission · edge lighting
Saudia Holidays booth, by The Touch
Saudia Holidays booth

Questions About a Future Minerals Forum Exhibition Stand

Asked by delegation coordinators and by marketing managers at mining and service companies preparing for January 2027.

When and where is the Future Minerals Forum 2027?

From 12 to 14 January 2027 in Riyadh. The organiser's 2027 pages and its brochure name the King Abdulaziz International Conference Center as the venue, and describe this as the sixth edition.

Is there an exhibition, or is it only a conference?

There is an exhibition, which the brochure calls the International Exhibition and which runs alongside the conference. The organiser describes indoor exhibitors and country pavilions, a Mineral Exploration Hub for junior explorers, a Hub of Excellence for technology, and an outdoor area for heavy machinery. The ministry counted 274 exhibitors at the 2026 edition.

Who organises it, and how is space booked?

The forum is organised by the Ministry of Industry and Mineral Resources. The brochure gives an email address for sponsorship and exhibition enquiries, and the site links an interactive floor plan. Prices and availability come from the organiser's team, not from a booth builder.

Is the exhibitor manual public?

Not on the open site. It is the document that states build heights, build hours, accreditation and delivery rules for the venue, so ask the organiser for it as soon as your space or package is confirmed. We ask for your copy with the brief, and nothing on this page is quoted from it.

Is there still time for a custom Future Minerals Forum exhibition stand?

For a single level custom booth, yes, if the brief reaches us now: it takes 6 to 8 weeks from brief to opening, and in mid November 2026 the opening is about two months away. An island or a double deck takes 8 to 10 weeks and is tight for this edition. A modular booth with new graphics needs 2 to 4 weeks, and a rental kit from stock 5 to 10 working days.

Our package includes a pre-built pavilion. Is there anything left to do?

Usually the part visitors remember. The funding matrix lists a pre-built stand of 45 or 72 square metres for the two government partner tiers, and the organiser decides what may be added to it. Within that limit, the map wall, the display cases, the graphics in two languages and the seating plan of the booth are designed and made for your delegation.

Can the meeting room have a door and a ceiling?

That is for the manual. Enclosed and covered spaces on a booth normally need approval on fire safety grounds, and some organisers limit their size. Ask before the layout is fixed, and have the room drawn both ways, closed and open topped, so that the answer does not hold up the design.

How should core samples and mineral specimens be shown?

On the booth, in locked, lit cases at a height where a group can look together, each piece labelled in both languages with where it came from. Send the weights and sizes with the brief, because the plinths are built around them. How samples enter the site, and whether they stay overnight, are points to settle with the organiser.

Can an agreement be signed on the booth?

Many are signed during the forum: the ministry reported 132 agreements and memoranda at the 2026 edition. Whether a signing takes place on your booth or in a space the organiser provides is the organiser's decision, so ask early. If it is on the booth, the layout keeps a clear area, a table and a backdrop ready for it.

What do you need from us to quote a booth?

The space size and open sides, or the package you hold, the manual when you have it, the number of meeting rooms and seats, and a list of what goes on show with its weights. Say too if you want hosts with a supervisor at the reception. The itemised quote reaches you within 24 hours, with transport, where it applies, as a named line.

Exhibiting at the Future Minerals Forum 2027?

Tell us which space or package you hold, send the manual if you have it, and list what your delegation needs: rooms, seats, a map, cases, a screen wall. An itemised quote, a first concept for the booth and a schedule counted back from 12 January reach you within 24 hours. Call 0567069088 or write to us on WhatsApp.

1
Powered by Joinchat
Call now WhatsApp