Automotive aftermarket trade show · Riyadh Front, June 2027 · 12 PM to 8 PM

Automechanika Riyadh Exhibition Stand 2027: Parts, Tyres, Oils and Tools on Show

Automechanika Riyadh has a settled date at last: 21 to 23 June 2027, at Riyadh Front Exhibition & Conference Center, with doors open from 12 PM until 8 PM. Messe Frankfurt Saudi Arabia runs the show, and its releases trace two changes of plan. The May 2026 edition was postponed, January 2027 was then announced, and a release dated 5 November 2026 pushed the show to June. The building changed too. In 2025 more than 450 exhibitors spread over five halls of the Riyadh International Convention & Exhibition Centre, so a plan drawn for that venue no longer fits. Visitors to an Automechanika Riyadh exhibition stand are distributors, wholesalers, fleet operators, service centre owners and retailers. They come to read a part number, press a thumb into a tread, check the oil grade printed on a can and watch a scan tool talk to a car. Seen from mid November 2026, about seven months remain, a comfortable margin for a custom build. What follows: the facts as Messe Frankfurt publishes them, the points to agree with its team, a booth format for each aftermarket sector, and a build timetable worked back from 21 June.

12 to 8 PMshow hours each day
10official product sections
450+exhibitors in 2025, per the organiser
24hfor a priced, itemised booth proposal

Automechanika Riyadh 2027: Dates, Venue and Facts

We took every row from Messe Frankfurt's pages and press releases, on the date printed beneath the table, and kept each figure with the edition it describes. Four things were missing from the public site: the exhibitor manual, the build up schedule, the stand packages and the technical regulations. None of the lines below should be read as quoting them. The rest of the season is in our exhibitions calendar, where each date was traced to an official page too.

Automechanika Riyadh

Dates21 to 23 June 2027
VenueRiyadh Front Exhibition and Conference Center
CityRiyadh
OrganiserMesse Frankfurt
SectorAutomotive aftermarket
Official pageautomechanika-riyadh.ksa.messefrankfurt.com/riyadh/en.html
Show hours12 PM to 8 PM on all three days, as given on the planning and visitor pages
OrganiserMesse Frankfurt Saudi Arabia, named in the 2026 press releases, with the show director at Messe Frankfurt Middle East. A 2025 release described 1st Arabia as licensee of the show
Two postponements, one dateThe edition planned for 4 to 6 May 2026 was put back by a release of 8 April 2026. On 22 April 2026 the organiser announced 11 to 13 January 2027 at Riyadh Front, and a release dated 5 November 2026 then moved the show to 21 to 23 June 2027
Pages that still say JanuaryOn the day we read it, the body text of the Arabic home page still gave January 2027 while its banner showed June. Any brochure, invitation or floor plan naming January or May is out of date
Change of buildingRiyadh Front Exhibition & Conference Center replaces RICEC, the Riyadh International Convention & Exhibition Centre, which hosted every edition from 2018 to 2025
The 2025 edition in figures450+ exhibitors from 30+ countries or regions, on 19,270 square metres in five halls. Top exhibiting nations: China, Taiwan, Hong Kong, Saudi Arabia and the UAE
Expected for 2027More than 19,000 visitors and over 500 exhibitors, according to the release that first announced Riyadh Front
The ten sectionsParts and Components, Electrics and Electronics, Connectivity and Autonomous Driving, Accessories and Customising, Tyres and Batteries, Car Wash, Care and Detailing, Oils, Lubricants and Fuels, Diagnostics and Repair, Body and Paint, Digital Solutions and Services
Visitor profile given by the organiserManufacturers, distributors, wholesalers, retailers, owners of repair businesses and service centres, fleet operators and transport companies, importers, plus government and industry professionals
Who may enterTrade visitors only: no one under 18 and no visitor with a private interest. Exhibitors and visitors travelling from abroad need a Saudi visa, the visitor page notes
Programme on the floorAftermarket Central for market talks, Grand Tour Challenges for hands on technical contests, and a demonstration area for service tools, equipment and repair technology
Meetings set up in advanceBusiness Matchmaking costs nothing. Once its catalogue entry exists, an exhibitor gets a login and books meetings with matching visitors in an online diary
Help against copiesMesse Frankfurt Against Copying keeps an information stand at the fair, and a portal where exhibitors and their lawyers can prepare beforehand
DebutThe first edition opened on 5 February 2018 with more than 150 exhibitors from 21 countries

Official sources we read: Official site, home page, Show overview, Getting ready to take part or attend, Visitor rules and visas, Venue page, Business Matchmaking service, Reasons to exhibit, The ten product sections, The organiser's stand building offer, Anti counterfeiting initiative, Programme on the floor, Release dated 5 November 2026: move to June 2027, Release of 22 April 2026: Riyadh Front and January dates, Release of 8 April 2026: May 2026 edition put back, Release on the record 2025 edition, Release of 30 April 2025 as the seventh edition ended, Release on the February 2018 debut, Arabic version of the official site. Sources last checked: 16 November 2026.

What Messe Frankfurt Decides and What You Should Ask

Messe Frankfurt handles space through an online enquiry, and it sends the manual, order forms and technical regulations once a contract is signed. Its site also advertises a stand building service of its own. Nothing here therefore repeats a regulation. Instead you will find the questions an aftermarket booth raises, the party that settles each, and what goes on our drawings once that party replies in writing. Share the manual with your brief and the design follows it.

A floor plan for a building you have not used

From 2018 to 2025 the show stood in RICEC; in 2027 it opens at Riyadh Front. Roof heights, rigging points, hall doors, columns and truck routes belong to the building. Request the 2027 hall plan and the venue technical sheet before recycling any layout from an earlier edition.

A car, a truck or a motorbike on the booth

Organisers usually set conditions for any vehicle shown indoors: how much fuel may remain in the tank, whether the battery must be disconnected, which door it enters by and at what point in the build. Ask for those conditions in writing, and ask whether the vehicle goes in before the booth walls are raised. The answer decides where the opening in the structure sits.

Weight on the hall floor

A vehicle lift, a pallet of batteries, a wall of truck tyres or a wheel balancer is far heavier than furniture. The venue sets the floor loading, and lifting equipment on site is normally ordered through the organiser. Give us the weight and footprint of every heavy exhibit so the platform is drawn around it.

Oils, sprays and anything flammable

Lubricants, additives, brake cleaners and aerosols are the core of several sections, and the venue treats flammable liquids and pressurised cans with care. Ask what may be kept on the booth, in what quantity and how it is stored. Sealed display packs and empty dummy bottles answer most of the question before it is asked.

Power, compressed air and noise

A tyre changer, an impact wrench or a battery charger needs the right supply, and some need compressed air. Ask the organiser what electrical supply can be ordered, whether compressed air is offered in the hall, and whether running equipment has noise limits or set demonstration times. Electrical orders go in on the organiser's forms, by its deadline.

Who may build your booth

Messe Frankfurt's own build service is offered on its stand construction page, and nowhere on the public site is there a register of contractors, approved or otherwise. If you would rather hire an independent builder, write to the operations team and ask whether outside contractors need registration or approval, and which drawings, insurance and staff passes they must file, by which date. Have that answer in hand before any builder signs your contract, The Touch among them.

Build up, dismantling and daily access

Neither the build up days nor the dismantling window for June 2027 is published yet. They come in the manual. As the doors open at 12 PM, ask also whether exhibitors may enter in the morning on show days to restock samples, charge demonstration units and clean the floor.

What the space package contains

Booking bare floor and booking a shell scheme start two separate projects, and the public site explains neither. Ask for the contents in writing: panel height, fascia, flooring, sockets, lights and furniture, and whether a panel may be drilled or wrapped. Any upgrade is drawn against that list.

Drawings and supporting documents for the organiser and the venue are ours to prepare. Approving them is theirs. For the last month, from the electrical order to badges, work through our checklist for exhibitors.

Booth Formats for Each Aftermarket Sector

Exhibitors here run from one parts maker from overseas inside a national pavilion to a regional distributor with a long list of brands. Seven formats cover most of what an Automechanika Riyadh exhibition stand is asked to do, starting light and ending heavy.

Upgraded shell scheme for an overseas manufacturer

Many exhibitors fly in from abroad with samples in a suitcase. The fitted space becomes a small trade counter: full height graphics with the product range and the Arabic name, lit shelves for real parts, a lockable cupboard and a table for distributor talks. Allow 2 to 3 weeks.

Distributor booth for many brands

An aftermarket distributor sells availability as much as product. A space of 18 square metres, better still 36, gives room for a long wall showing every brand in its own colours, a counter with a part lookup screen in front, and a closed meeting room behind for territory talks.

Tyre and wheel booth

Tyres need a structure that holds their weight and keeps them still. Cradles cut on our CNC machines carry a full wall of tyres at an angle, the tread facing the aisle, with wheels and rims lit against a dark panel. Tell us at the brief what each exhibit weighs: the platform is built for those weights, within the floor loading rule that the organiser and the venue apply.

Lubricant and car care booth

A brand of oils or detailing products sells on trust in its label. Pack walls with a lip on every shelf, a mock service bay where a technician explains grades and change intervals, and a polishing station on a car panel give the visitor something to look at besides bottles.

Equipment and diagnostics booth

Lifts, alignment rigs, calibration targets and scan tools need open floor more than walls. The booth is a clean service bay with a sealed floor, power drops where each machine stands, a screen that mirrors the diagnostic tool, and a raised platform that keeps visitors at a safe distance from moving parts.

Island booth with a vehicle at its centre

For a brand with a strong story, a car on a lit plinth draws the aisle from every side, and the parts or the accessories it carries are shown around it. Plan on 8 to 10 weeks between the approved brief and opening day, and settle the vehicle's way in before the structure is drawn.

Modular kit for a returning exhibitor

If your booth was ready for May 2026 or January 2027, its reusable frame still has value. Fresh panels for the June dates and the new hall take 2 to 4 weeks, and afterwards the frame goes back into our storage.

Automechanika Riyadh Exhibition Stand: Working Back from 21 June 2027

Each row of the table is a date worked back from opening day, and as of mid November 2026 none of them has passed. Three issues particular to this show deserve the early weeks. First, exhibits from abroad: East Asia supplied most of the leading exhibiting nations in 2025, and parts, tyres or a demonstration car sent by sea must clear customs and arrive at our factory before the test assembly. Second, visas: the visitor page says staff flying in need one before travel. Third, the new hall: no drawing starts until the 2027 plan arrives. Send the brief for a custom booth design by late April 2027 to stay on the standard timetable. An island with a vehicle, at 8 to 10 weeks, wants its brief earlier still, while a modular booth can begin in late May. Our guide how long an exhibition stand takes walks through every stage.

Automechanika Riyadh · 21 to 23 June 2027

DateStageStatus
26 April 2027The brief, the space contract and the exhibitor manual in hand: a custom stand starts hereAhead
10 May 2027Design approved, and drawings sent to the organiser where it asks for themAhead
24 May 2027Last sensible start for a modular stand with new graphicsAhead
31 May 2027Graphics go to print on the final panel sizesAhead
7 June 2027Full test assembly in the factory, and the last start for a rental kit from stockAhead
14 June 2027Transport booked for the build window the organiser setsAhead
·Installation in the hall, inside the hours written in the exhibitor manualPer the exhibitor manual
21 June 2027Opening dayAhead
23 June 2027Closing, then dismantling in the organiser's windowAhead

What is still realistic for this edition · 221 days to openingThere is time for a custom stand on the normal schedule, provided the design is approved on its date.

Status worked out on 12 November 2026.

What Sells on an Aftermarket Show Floor

Buyers at an aftermarket show are technical and price aware. They want to identify the part, judge its quality and know who supplies it in the Kingdom. A booth earns its space by making those three things quick.

A part lookup at the counter

The first question a distributor asks is whether you cover a given model. A screen or tablet at the counter that finds the part by vehicle, by OEM number or by your own reference answers it on the spot, and the result can be sent to the visitor's phone.

Components cut open

A shock absorber, a brake caliper, a filter or a pump sectioned and lit on a plinth shows build quality better than any brochure. Label each layer, and keep a whole unit beside it that visitors may pick up.

Genuine beside counterfeit

Copied parts and packaging worry every buyer in this market. A small case with your genuine box next to a copy, and the marks that tell them apart, builds trust fast. Messe Frankfurt Against Copying has an information stand at the show if you need advice on enforcement.

Tread at eye level

A tyre on the floor is a black circle. Raised to eye level and lit from the side, its tread pattern, sidewall markings and compound can be read, and a visitor can run a hand over it.

Liquids without the mess

Oil on carpet stays there for three days. Show lubricants in sealed packs or dummy bottles, keep any open demonstration over a tray, and choose a floor finish that can be wiped clean.

A scan tool that runs

Diagnostics sell when they work in front of the buyer. Connect the tool to a stationary vehicle or a bench unit, mirror its screen to a larger display above, and let the visitor hold the handset.

Half polished, half not

For car care and paint protection, a bonnet or door panel treated on one half only tells the story without words. Protect the floor around it and keep spare panels in the storage cupboard.

Fleet buyers want numbers

Fleet operators and transport companies compare cost per kilometre, service intervals and downtime. A wall that sets out those comparisons for your product, with a contact for fleet sales, speaks to them directly.

Meetings booked through matchmaking

Business Matchmaking is free once your catalogue entry is live. Use it to book distributors and fleet buyers into fixed times, and keep a table in the quiet corner of the booth free for them.

Two languages on every wall

Visitors are mostly Saudi trade buyers, and exhibitors often come from abroad. Print product names, sections and key claims in Arabic and English, and staff the booth with at least one Arabic speaker each day.

Read Next Before You Write the Brief

Because the show is in Riyadh, the practical side, from build windows to crews on site, sits on our page about building exhibition stands in Riyadh. A dealer evening, a launch or a distributor dinner in show week belongs with our event management in Riyadh. Automotive, mobility and industrial dates for the rest of the season are in our calendar of Saudi exhibitions, 2026 and 2027. For the money side, line by line, read what an exhibition stand costs in Saudi Arabia. Returning exhibitors can begin with modular and portable stand systems, and a full build is described under our custom exhibition booths. An island with an upper meeting floor should start from the rules for double deck stands, and a car or a parts wall lit without glare from our guide to stand lighting.

Mistakes Aftermarket Exhibitors Make at This Show

Most of these come from the date and venue changes, and the rest from treating an aftermarket booth like any other. All of them can be avoided early.

Graphics that carry an old date

Banners, flyers and invitations printed for May 2026 or January 2027 may still sit in your store. One of them on the booth tells buyers you were not paying attention. Check every printed piece before it is packed.

A layout drawn for the old venue

Columns, doors and ceiling heights at Riyadh Front differ from those of the previous building. A plan copied from 2025 may block a fire route or face the wrong aisle. Draw it again on the 2027 hall plan.

A vehicle that arrives unannounced

A car turned away at the hall door on build day leaves a hole in the middle of the booth. Agree its entry slot, its fuel and battery condition and its route in writing well before shipping.

Carpet under heavy exhibits

Carpet tears under a lift and stains under oil and tyre rubber. For exhibits like these, specify a sealed hard floor or a raised platform from the start.

The whole price list on the walls

A wall carrying every reference you stock is a catalogue nobody reads. Show the lines that matter to Saudi buyers, and keep the full range in the lookup screen and the printed catalogue.

Staff who cannot answer the local question

Aftermarket buyers ask who your agent is, where stock is held and how long delivery takes. A team flown in without those answers sends serious visitors away with a brochure only. Settle the answers before the show.

One Factory and One Crew, From First Cut to Last Bolt

Clients we have worked for include Saudia, Al Khaleej Al Gharbiya, Swarovski, Ascenda and Johnson & Johnson MedTech. Our designers, CNC and laser cutters, joiners, painters, acrylic fabricators and large format printers share one roof, so a single team makes the tyre cradles, the parts shelving and the lit brand wall of your booth and fits them together before anything leaves. The whole booth is then put together in full in our factory as a test. Our own crew installs it in the hall, remains on hand through opening day and takes it down once the show closes. The Touch works from more than one location in the Kingdom; whichever one handles your job, the booth is made in our own factory and installed by our own crew. Our role is that of an independent builder, hired by exhibitors for the space each has booked. Neither Messe Frankfurt nor the venue has appointed us, and the organiser's build service is a separate offer you can weigh against ours.

Booth with blue edge lighting, by The Touch
Booth with blue edge lighting
Booth with tall lit tower, by The Touch
Booth with tall lit tower
Ascenda booth with neon frames, by The Touch
Ascenda booth with neon frames
Johnson & Johnson MedTech booth, by The Touch
Johnson & Johnson MedTech booth
Saudia Holidays booth, by The Touch
Saudia Holidays booth

Your Automechanika Riyadh Exhibition Stand: Questions Answered

What aftermarket parts makers, distributors and marketing teams ask us ahead of the June show.

What are the dates and the venue of Automechanika Riyadh 2027?

The organiser's site gives 21 to 23 June 2027 at Riyadh Front Exhibition & Conference Center. Doors open at 12 PM and close at 8 PM on all three days.

Why do some pages show other dates?

The show has moved twice. The May 2026 edition was postponed, January 2027 came next, and a release dated 5 November 2026 fixed the current June dates. Older material, including the body of the Arabic home page when we read it, may still mention January.

Who runs the show?

The 2026 press releases name Messe Frankfurt Saudi Arabia as organiser, with the show team based at Messe Frankfurt Middle East. Exhibitors apply for space by filling in the online enquiry on the official site.

Is the show open to the public?

No. Entry is limited to the trade, and nobody under 18 or visiting out of private interest gets in. Among its visitors the organiser lists manufacturers, distributors, wholesalers, retailers, service centre owners and fleet operators.

Where are the build up dates and the exhibitor manual?

We found neither on the public pages. Both reach exhibitors after contract, along with the order forms and the technical regulations for Riyadh Front. Send us your copy with the brief, since nothing on this page quotes it.

Do we have to use the organiser's stand builder?

Messe Frankfurt offers a stand building service of its own, and its public site carries no register of approved contractors. Write to its operations team to ask whether an independent builder may work on your space and what that builder has to register, then choose freely. We are independent and claim no appointment from the organiser.

Can we show a car on the booth?

Usually yes, under the organiser's conditions on fuel, battery, entry door and timing. Those conditions are in the manual or come from the operations team, and they decide where the opening in the booth is left. Plan an island of this kind 8 to 10 weeks ahead.

Is it too late for a custom booth design?

No. Expect 6 to 8 weeks between the approved brief and opening day, and from mid November 2026 the show sits about seven months out. A brief that lands by late April 2027 holds the standard timetable, and an earlier one helps when exhibits travel from abroad.

We had a booth ready for January. Can we use it?

A modular kit or a stored custom booth can usually be reused, with new graphics in 2 to 4 weeks. The layout must be checked against the Riyadh Front hall plan, and every printed date replaced.

What should we send for a price?

The space size and which sides open to an aisle, the exhibits with their weights and any power or air they need, and whether a vehicle comes. You get an itemised price within 24 hours, and where transport applies, the quote shows it as a named line.

Booked Your Space at Automechanika Riyadh 2027?

Tell us how big the space is, which sides are open and what you will exhibit on your Automechanika Riyadh exhibition stand. Within 24 hours a priced, itemised quote reaches you, with an early sketch of the booth and dates worked back from 21 June. Phone 0567069088, or write to us on WhatsApp.

1
Powered by Joinchat
Call now WhatsApp