Booth rental in Riyadh starts with paperwork, not with a catalogue: the space contract you signed and the exhibitor manual the organiser published. Between them they decide whether a rented booth may stand on your space, how high it may rise and when our crew may enter the hall. We prepare a rented kit against that manual. The structure comes from our rental stock, the graphics are printed for your brand, and our own team builds it, stays for the opening and takes it down.
Riyadh's trade shows are run by organisers who enforce their manuals to the letter, many of them international companies. A rented booth that ignores the document is stopped at the hall door, however good it looks. That is why booth rental in Riyadh begins with reading it.
Space only means a bare floor and a booth you bring with you. Shell scheme means the organiser's walls are standing before you arrive. We ask which of the two you signed before we suggest anything rented, because the answer changes the whole job.
On a space only contract most organisers want a plan and elevations by a set deadline, even when the booth is a ready system. We draw the rented kit to scale, mark its height and its lighting load, and you submit the file through your exhibitor account.
Organisers commonly ask each exhibitor to name its contractor and to request passes for the build crew. We send the names and the papers the manual lists, so nobody waits outside the gate on the first build day.
A rented booth goes up in hours, which suits the short build-up windows of Riyadh shows. It is assembled complete with your graphics in our factory first, so the hall is the second place it stands, not the first.
A hired structure is only the start. The teams below work alongside the rental crew and fill the booth.
The graphics for each show, and the reprint between two of them, done in 1 to 5 working days.
Hosts for the show days who know your product and work under a supervisor.
Pieces made to your order, such as a lit logo, that clip onto the rented frame and remain yours.
Artwork adapted from one show to the next, when the audience changes and the kit does not.
Lead capture on a tablet, so the enquiries from the first show are in your hands before the second.
A live demonstration or a tasting planned inside the footprint of the rented booth.
Coverage of your booth and your team on the show floor, edited for your channels.
Design and fabrication from zero, for the show where you need more than a rented system.
Situations that repeat through the Riyadh season, and what the rented kit looks like in each of them.
A bare floor of 9 or 18 square metres, and a manual written in English with forms to return on fixed dates. The rented kit arrives as walls, counter, lighting and flooring, drawn to the height the manual allows for your type of space.
Riyadh's calendar often places shows of neighbouring sectors close together. One rented kit serves both of them. The frame, the lights and the floor stay, while the graphics, the layout and the counter position change to suit the second space.
Some organisers let an exhibitor take bare space instead of the shell and others do not, so ask in writing before you plan. If the shell has to stay, we dress it with graphics, a counter and lighting instead of bringing a rented frame.
The sponsorship package states the footprint, often a table with a wall behind it, and the hotel sets the hours for bringing things in. A rented back wall, a counter and a screen arrive in cases, stand on their own bases, and lock together with no cutting or painting in the room.
Foyer space is tight and entry is controlled more closely. A table top kit suits it: a printed wall, a wrapped table, a small display and a screen, with crew names sent ahead when the host asks for them.
When a show in a sector that is new to you appears on the Riyadh calendar, renting for that first attendance lets the enquiries you collect, not a forecast, decide whether the next booth is rented again, owned or built.
The organiser's calendar, not ours, sets the order: forms first, then artwork, then the hall.
The space contract shows the size, the open sides and whether it is space only or shell scheme. The exhibitor manual, or the link to the organiser's portal, tells us the rest: heights, deadlines and build-up days.
From the contract and the manual we pick a rented kit that fits the space and the permitted height, and draw it on your floor plan. The itemised quote follows within 24 hours of your message.
Where the manual asks for them, we prepare the plan, the elevations, the contractor details and the material details. You upload them from your account, and approval remains the organiser's decision alone.
We send a template with the exact size of every panel, and the artwork is laid out on it by your studio or by ours. Once printed, the graphics go onto the rented booth, which is assembled complete in our factory, and photos from every side reach you before it moves.
Our own team arrives on the day and at the hour the manual gives your hall, builds the booth, tests the lights, clears the empty cases and hands the booth to your stand manager.
The team stays for the opening. After the last day we dismantle inside the tear-down window, pack your graphics for you and take the rented parts back.
Ready in 5 to 10 working days, counted from the day the order is confirmed.
Printed in 1 to 5 working days after you sign off the artwork.
2 to 3 weeks when the organiser's shell stays and we dress it.
2 to 4 weeks, for the exhibitor who decides to own the frame instead of hiring it.
A day rate would mislead, since an evening in a hotel foyer and a trade show with several build-up days ask very different things of the same rented kit. So the quote is split into what you hire, what you buy and what the organiser invoices directly.
Every rented piece is written on its own line, from the frame and its wall panels down to the chairs, with the day the kit goes out and the day it is due back. All of it stays ours.
Printed for your brand to the panel sizes of the kit, with the price following the number of panels and the print material. They are your property and go home with you, ready for your next show.
Each attendance has its own line. A build that the organiser schedules at night is written in the quote as a night build, so it does not appear later as a surprise.
The scaled drawing of the rented booth and the contractor details the manual asks for. If the organiser charges a contractor fee or holds a deposit, the quote says who pays it.
For back to back shows the quote lists the first rental, the days between when the kit rests in our storage, and the second rental with its new graphics, so the saving is in front of you.
Floor space, the electricity connection, internet, rigging from the ceiling and extra passes are ordered on the organiser's forms. We tell you which of them your rented booth needs, and at what electrical load.
With the space contract, the show name and its dates in hand, we return a rental quote within 24 hours, every line named. Send the details or write to us on WhatsApp at 0567069088. Weighing a rental against owning? What moves that budget is set out in our guide to exhibition stand cost in Saudi Arabia.
Riyadh's main halls do not treat a rented booth in the same way. The Riyadh Exhibition and Convention Center in Malham lies outside the city, so a forgotten connector cannot simply be fetched during build-up: a kit bound for Malham travels with its own spares crate, holding fixings, lamps, cables and a spare printed panel. The Riyadh International Convention and Exhibition Center is inside the city, and vehicle access there follows the unloading schedule written in the organiser's manual. The Riyadh Front Exhibition and Conference Center hosts several of the international shows on the calendar, each with a manual of its own. Hotel ballrooms and government buildings take a kit that packs into cases and passes through the service entrance. Start from our exhibition booths in Saudi Arabia page to see every route, and compare budgets in the article on exhibition booth prices. When the show deserves a stand made for it, read the exhibition stand builder in Riyadh page, or, for the drawings first, booth design in Riyadh. A frame you would own is on modular and portable stands, the conference or launch around the booth is with event management in Riyadh, and the coming dates are in the Saudi exhibitions calendar.
In Riyadh the answer follows the contract in your hand and the weeks you have left.
Rent. A kit from stock is ready in 5 to 10 working days because nothing is fabricated: the printing is the only production. A custom stand needs 6 to 8 weeks from brief to opening.
Upgrade it. Full height graphics, a counter, better lighting and flooring over the organiser's walls take 2 to 3 weeks, with no rented frame at all.
Build. At the leading show of your sector, visitors compare you with the stands on either side, and a system kit looks like what it is. A custom stand, or an island of 36 square metres, is designed for that one show.
Own. With a crowded calendar a modular stand of your own costs less: it is ready with new graphics in 2 to 4 weeks, rests in our storage between shows, and ends the repeated rental fee.
A rented kit is built from straight panels at standard heights. A curve, a tall tower or a double deck has to be fabricated, and the organiser reviews its drawings for longer. A double deck needs 8 to 10 weeks from brief to opening, so it is never a last minute choice.
Every one of them is written in the exhibitor manual. The trouble starts when the manual is opened after the kit is booked.
A rented frame ordered for a shell scheme space arrives to find walls already standing where it should go. Check the type of contract first, then choose.
The organiser sets a date for space only drawings, and some charge for a late file. A rental decided at the last moment may already be past that date, so ask the organiser before you confirm.
Passes for the build-up days are requested in advance from the exhibitor account. A team that arrives unregistered loses the first hours of a window that was short to begin with.
Inside the city a missing part is a nuisance. In Malham it can cost the whole evening, which is why the spares crate is packed and checked against a list before the rented booth leaves.
A wall printed with the show name, the hall or the stand number is no use at the next show. Keep the show details on a small panel that changes, and the brand on the large ones.
The organiser fixes the hours for dismantling and for vehicles to enter after closing. The rented booth and your graphics leave in that window, so keep someone from your side reachable until then.
A rented booth is prepared by the people who have built 180+ exhibition stands and delivered 350+ projects in 15+ years. Drawing, CNC and laser cutting, joinery, painting, acrylic work, large format printing and installation all happen under one roof, so the kit you hire is checked by the trades that would repair it. Our stands and displays have stood for the Heritage Commission, Kinan, Cartoon Network, Saudia Holidays and Johnson & Johnson MedTech.
Stands and displays our own team designed, built and installed, with no middleman.





Asked by exhibitors before their first rented booth at a Riyadh show.
A complete rented kit, meaning the frame with its walls, the counter, the lights, the floor and the furniture, prepared to the manual of your show's organiser, with our own team attending for build-up, the opening and tear-down. The printed graphics are a separate line because you buy them and keep them.
The shell is usually built before you arrive, so a rented frame has nowhere to stand. Either the organiser agrees in writing to give you bare space, or we upgrade the shell with graphics, a counter and lighting. The contract tells us which case is yours.
On a space only contract most organisers ask for drawings whatever the booth is made of. We prepare the plan and elevations of the rented kit and you upload them from the exhibitor account. The approval itself is the organiser's decision.
Yes, and Riyadh's calendar makes it common. The frame, lighting, flooring and furniture stay, while the graphics, the layout and the counter position change to suit the second space. Between the two shows the kit comes back to us, is checked, and is dressed in new graphics printed in 1 to 5 working days.
Count 5 to 10 working days between your confirmation and a rented kit that is ready to go. The organiser's deadline for drawings and contractor forms can fall earlier than that, so send the manual as soon as it reaches you. In the busy months kits are reserved in the order confirmations arrive.
No. We are an independent builder working for exhibitors on the space they booked. Where the organiser asks outside contractors to register, we provide the documents the manual lists.
The rented booth is packed with a spares crate that is checked against a list before it leaves: fixings, lamps, cables and a spare printed panel. Our team stays on site through build-up and the opening, because a quick trip for a missing part is not possible there.
Yes. A sponsor corner is usually a printed wall, a wrapped table, a small display and a screen, sized to the footprint written in the sponsorship package. It stands on its own base, and the hotel's walls and carpet are left untouched.
Whatever carries your brand in print leaves with you, and so does any piece fabricated for you, an acrylic logo for example. Everything else, from the frame to the last chair, is rented and is collected by our crew after tear-down.
We have more than one location in the Kingdom. Your rented booth is prepared in our own factory and installed by our own team, and where transport applies it is a named line in the quote.
Send the space contract and the exhibitor manual, or simply the show name and your stand number. Within 24 hours you know which route fits, and what it costs line by line.
If your question is narrower than this page, these are written for one question each.
Most projects here combine more than one service. This is the full range, with the ones closest to this page first.