PVPC Global, the Pumps, Valves, Pipes and Compressors Exhibition, holds its fifth edition at Dhahran Expo in Dammam from 14 to 16 September 2027, with Refrigeration Expo and the Global Economic Zones Leaders Summit running on the same dates. Hazm Events, the Dubai based organiser, describes the show as the Kingdom's platform for flow technology: the equipment that moves, controls, measures and seals fluids and gases inside process plants. That is why a PVPC Global exhibition stand gets judged by rotating equipment engineers, valve and piping specialists, metering and instrumentation teams, procurement staff and EPC contractors, people who can tell a well machined impeller from a catalogue photo at a glance. The floor is laid out in eight product zones, so the company across the aisle will often be your direct rival. Counting from mid November 2026, about ten months remain before the doors open, long enough for any booth format, yet the dates that decide the build fall in high summer. This page sets out what Hazm Events has made public and what it keeps for its written proposal, booth formats suited to pumps, valves, pipe and compressors, and a dated plan counted back from 14 September.
Everything in the tables comes from pages run by Hazm Events and its sister show, listed underneath with the date we read them. The organiser publishes a per square metre rate for each of its two stand options, yet no exhibitor manual, no build regulations, no daily hours and no submission dates; it says those reach each company through the written proposal and its exhibitor team. So wherever this page talks about rules, it offers questions for the organiser rather than its words, and your PVPC Global exhibition stand gets designed against the real requirements once they arrive. Other shows in the Eastern Province this season, listed with organisers and dates, sit in our Saudi exhibitions calendar.
| Dates | 14 to 16 September 2027 |
|---|---|
| Venue | Dhahran Expo, Dammam |
| City | Dammam |
| Organiser | Hazm Events |
| Sector | Pumps, valves, pipes and refrigeration |
| Official page | pvpcglobal.com |
| Full name | Pumps, Valves, Pipes and Compressors Exhibition, shortened to PVPC Global |
|---|---|
| Edition | The fifth, according to the organiser; the open site gives neither the years nor the venues of the earlier ones |
| Organiser | Hazm Events, based in Dubai and founded in 2016, which also runs the two events held alongside |
| Scale given for 2027 | 15,000+ industry professionals, 400+ exhibitors, 7 country pavilions, 100+ speakers and 3 exhibition halls |
| The eight product zones | Pumps; valves and actuators; pipes, tubes and fittings; compressors, blowers and vacuum; seals, gaskets and sealing systems; flow control, metering and instrumentation; piping systems and fabrication; smart flow, AI and digital solutions |
| Technical Summit | Held on 14 and 15 September with four conferences: pumps and rotating equipment, valves and flow control, piping and asset integrity, and smart flow, plus four certified technical training sessions |
| Awards | The PVPC Excellence Awards, whose categories the organiser lists as proposed and still being finalised |
| Held alongside | Refrigeration Expo, covering industrial and commercial refrigeration, process cooling and cold chain, and the Global Economic Zones Leaders Summit |
| Where refrigeration ends | Process compressors, plant air and plant controls belong at PVPC Global; refrigeration compressors, condensing units and cooling controls belong at Refrigeration Expo. Firms with both ranges can ask about exhibiting at the two |
| Stand options | Space only, for exhibitors bringing their own design and contractor, or a furnished shell scheme. Inclusions, upgrades and payment steps are set out in the written proposal |
| Industries targeted | Oil and gas, petrochemicals and chemicals, water and desalination, power and utilities, EPC and plant construction, manufacturing, mining and metals, infrastructure and district energy |
| Still unpublished | Daily hours, badge arrangements, in hall build rules, submission dates, a hall plan, the exhibitors' manual, and whether stand builders must be pre approved or registered |
Official sources we read: PVPC Global, organiser home page, About the event, Why exhibit, Stand options, Book a stand, Exhibitor categories, Visitor categories, Technical Summit, Co-located shows, Refrigeration Expo, home page, Hazm Events, organiser home page. Sources last checked: 17 November 2026.
Booking at PVPC Global runs in five steps: an enquiry form that carries no obligation, a space proposal with a position and a written quotation, your review, acceptance and payment as the proposal describes, then preparation with technical information from the exhibitor team. The form asks for your product zone, what you will display, the stand type you prefer and its size in square metres. Use that exchange to settle the points below in writing, because each of them alters the drawings of a PVPC Global exhibition stand. Send us the replies along with your brief.
A pump circulating water through a clear loop is the most watched object in any flow equipment hall, and also the one most likely to be refused. Ask whether water may circulate on the stand, how much may be held, whether a drip tray and a sealed tank are enough, and who inspects the setup before the doors open.
Valve makers like to stroke an actuator in front of visitors, and compressor makers like to run the unit itself. Ask whether the hall supplies compressed air or it must come from a small packaged unit, what noise level the organiser tolerates, and whether rotating parts must sit behind a guard.
A metering skid, a pump on its baseplate or a large gate valve can outweigh everything else on the booth. Ask what load per square metre the floor of your hall can take, whether lifting gear is booked through the organiser, and at what hour heavy pieces enter, so the walls rise after them and not before.
The floor is arranged by product zone. Ask which zone your space falls in, which of its sides are open, and whether a country pavilion surrounds it, since a pavilion may bring its own structure, heights and colours that your booth has to sit within.
Space only is intended for exhibitors who bring their own design and contractor; the shell scheme is the ready built option. With the shell, ask for its exact contents and the upgrades allowed. With space only, ask for the technical requirements before any drawing begins, as the organiser itself advises.
Ask whether Hazm Events or Dhahran Expo holds a register of approved stand contractors, what a builder has to file and by which date, and the build and dismantling hours. Do not sign with any stand contractor, The Touch included, until a written reply tells you where that register stands.
We draw up the plans, material sheets and documents that Hazm Events or the venue asks to see; issuing approvals and permits is their decision, not ours. For the last month of paperwork, form by form, work through our thirty day exhibitor checklist.
Flow equipment is bought on performance curves, pressure classes and materials, and a good PVPC Global exhibition stand puts all three within reach. These six formats run from a light shell upgrade to a full build; if an upper deck is on the table, read our article on double deck stand rules before anything else.
A distributor carrying several brands needs a clear wall of logos, a short row of hero products on shelves rated for their weight, and a counter where catalogues and price lists stay locked away. Allow 2 to 3 weeks for an upgrade of the organiser's shell along these lines.
Seals, gaskets and packing are small parts that are hard to tell apart from the aisle. On 9 or 18 square metres, a lit display table with cut sections under acrylic covers, magnifiers and samples labelled by service condition works harder than any large graphic.
A reusable frame with interchangeable plinths lets a valve maker change the lineup from show to show, isolation valves for one audience and control valves for the next. Reprinting the graphics takes 2 to 4 weeks, and our storage can hold the kit between events.
A pump set or packaged compressor deserves to be seen from all four sides, with its nozzles, coupling and baseplate in view. An island places the machine at the centre, a meeting room at one end and the company name lifted high on a sign, if the hall rules allow it. Allow 8 to 10 weeks from the first brief.
Spool and skid fabricators, coaters and insulation firms earn trust with a short length of their own work: a welded spool showing its flange faces, a coated section, an insulated elbow with the cladding cut back. The booth is then built around that piece on a reinforced floor.
A company that sells process compressors and refrigeration compressors may book at PVPC Global and at Refrigeration Expo. Drawing both booths from one kit of parts, colours and graphics keeps the brand consistent and lets panels move between the two.
Each date in the table is counted backwards from the opening on 14 September; in mid November 2026 every one of them still lies ahead. Read them with the Saudi summer in mind: a custom booth starts in the second half of July and its design should be signed off in early August, the weeks when engineering managers in the Eastern Province are most often travelling. A brief and a concept agreed in June keep the build moving while the people who approve it are away. Any equipment you plan to show also has to reach our factory before the test assembly at the end of August, so book its shipment from your plant or your principal early. The tasks behind each row are described in our guide to how long a stand takes.
| Date | Stage | Status |
|---|---|---|
| 20 July 2027 | The brief, the space contract and the exhibitor manual in hand: a custom stand starts here | Ahead |
| 3 August 2027 | Design approved, and drawings sent to the organiser where it asks for them | Ahead |
| 17 August 2027 | Last sensible start for a modular stand with new graphics | Ahead |
| 24 August 2027 | Graphics go to print on the final panel sizes | Ahead |
| 31 August 2027 | Full test assembly in the factory, and the last start for a rental kit from stock | Ahead |
| 7 September 2027 | Transport booked for the build window the organiser sets | Ahead |
| · | Installation in the hall, inside the hours written in the exhibitor manual | Per the exhibitor manual |
| 14 September 2027 | Opening day | Ahead |
| 16 September 2027 | Closing, then dismantling in the organiser's window | Ahead |
What is still realistic for this edition · 306 days to openingThere is time for a custom stand on the normal schedule, provided the design is approved on its date.
Status worked out on 12 November 2026.
Visitors here think in curves, ratings and failure modes. They stop where they can look inside a machine, compare materials and talk with someone who has fitted the product in a working plant. A PVPC Global exhibition stand that offers those three things fills up between summit sessions; one built around slogans stays quiet.
Half a pump casing with the impeller, wear rings and mechanical seal exposed, or a valve body sliced through the seat and stem, answers questions that no brochure can. Paint the cut faces in a contrasting colour so the internals stand out to anyone walking past.
Print the head and flow curve, the efficiency line and the NPSH data next to the pump they belong to, large enough for an engineer to read standing. The same goes for the flow coefficient of a control valve or the capacity map of a compressor.
Duplex, super duplex, lined and non metallic options make more sense grouped by the duty they suit: sour gas, seawater, high temperature. A table or rack sorted that way lets a visitor find their own case in seconds.
Where the organiser allows it, a valve stroking open and shut on a timer draws more eyes than any screen. Keep the cycle slow, the guard obvious and the controls tucked behind a panel.
Smart flow and predictive maintenance suppliers do best with a real data stream from a demonstration rig or an anonymised plant: vibration, temperature, flow. A trend line that shifts while the visitor watches beats any animation.
The organiser notes that national local content rules reward suppliers who are visibly present in the Kingdom. If your company manufactures, services or repairs in Saudi Arabia, show it plainly on one wall of the booth, using facts you can document.
If your product enters the PVPC Excellence Awards, keep a plinth free for it and a panel ready to update. A shortlisted or winning product deserves a move to the booth's front edge as soon as the result is announced.
Questions at this show open with duty point, material and certification. Station an application engineer at the booth's aisle edge during summit breaks, and let hosts handle badge scans, coffee and the visitor log.
Package engineers and procurement teams from EPC contractors come to shortlist vendors for named projects. A closed table with a screen, your vendor approvals and your reference lists turns a chat in the aisle into a proper technical clarification.
Dhahran Expo serves Dammam, Al Khobar and Dhahran alike. For the practicalities of a PVPC Global exhibition stand in its halls, read our pages on building stands in Dammam and stand builders in Al Khobar. When renting suits the budget better, the terms and the return inspection are explained under booth rental in Dammam. To see where each riyal goes, line by line, open the cost of an exhibition stand in Saudi Arabia. A booth that will travel to other process and energy events during the year starts with portable modular systems, and a one off build with custom exhibition booths. For smart flow dashboards and performance data on large displays, see LED screens for exhibitions.
All six are simple to fix during the planning months, and each one can cost a PVPC Global exhibition stand dearly when it is found on opening day.
Turning up with a pump loop or a compressor the organiser never approved can leave the centrepiece switched off for three days. Send a description of the demonstration with the drawings and keep the answer on paper.
A gleaming pump on a plinth tells an engineer very little. Without its curve, its materials and the standards it meets, it is simply an object.
The summit takes the first two days, and floor traffic climbs during its breaks. Plan staffing and demonstrations around those breaks, and treat the third day, with no sessions, as its own plan.
Bringing refrigeration compressors or cooling controls to PVPC Global cuts across the organiser's own split between the shows. If your range covers both, discuss a presence at each instead of crowding a single booth.
Exhibitors inside a country pavilion may face shared rules on height, colours and signage. Ask the pavilion organiser early, so the elements of your own booth fit.
Equipment shipped from a principal abroad can be held up on the way. If a piece misses the test assembly, its plinth, fixings and lighting are set blind. Ship early, or at the very least send exact dimensions and weights.
More than 15 years in exhibitions and events have given us 180+ exhibition stands and 350+ projects, and Oceanera, Kinan, Johnson & Johnson MedTech, the Heritage Commission and Saudia Holidays are among the names we have worked for. Our designers share one building with the CNC and laser cutters, the joiners, the paint team, the acrylic makers and the large format printers, so the plinth carrying a heavy pump, the acrylic cover over a seal section and the lit wall behind them come from the same hands and the same set of drawings. Each booth is erected complete in our factory and checked, with the travelling exhibits in position, before it is loaded. After that, our crew puts it up on site, stays for the opening and strips it down once the show closes. Although we operate from more than one location in the Kingdom, every booth comes out of our own factory and goes up with our own team. Our role is that of an independent builder hired by exhibitors for the space they reserved, with no official status at PVPC Global, Hazm Events or Dhahran Expo. Transport, when the job needs it, is priced as a separate item in the quote.





Questions that pump, valve and compressor firms, their agents and their marketing staff ask as the September 2027 show approaches.
Dhahran Expo in Dammam hosts it from 14 to 16 September 2027, according to the organiser. The Technical Summit takes the first two of those days. Daily opening hours have not been announced so far.
The organiser's site announces the fifth edition for September 2027 and gives no 2026 dates. If you searched for PVPC Global 2026 or the PVPC Global expo, the next show to plan a PVPC Global exhibition stand around is the 2027 one in Dammam.
Hazm Events, an organiser based in Dubai and founded in 2016, which also runs Refrigeration Expo and the Global Economic Zones Leaders Summit. Exhibit and sponsorship enquiries go through the Book a Stand page to its sales team.
Products in eight zones: pumps; valves and actuators; pipes, tubes and fittings; compressors, blowers and vacuum; seals and gaskets; flow control, metering and instrumentation; piping systems and fabrication; and smart flow and digital solutions. Refrigeration and cooling products go to the co-located Refrigeration Expo.
The Refrigeration Expo site says visitors receive a single badge for all three audiences, while the PVPC Global pages say access between the events is still to be confirmed. Treat it as open until the organiser states it in writing.
Through the visitor form on pvpcglobal.com, which records interest in product zones, summit sessions and training topics. Submitting it opens your email app with the details addressed to the visitor team, and you have to send that email yourself. A confirmation follows by email.
Space only, for exhibitors with their own design and builder, makes sense when you show heavy or running equipment, need a meeting room or want a strong brand statement. The furnished shell scheme suits a first appearance, a distributor or a narrow range. Either way, the inclusions are confirmed in the organiser's written proposal.
Plenty. Brief to opening is 6 to 8 weeks for a custom booth, and islands and double decks need 8 to 10. The risk is the summer, so settle the concept before July and sign off the design ahead of the August holidays.
Only if the organiser approves it, and that answer belongs in writing before any design is frozen. We then size the plinth to the machine's weight, allow for the drip tray or guard it needs, and plan its arrival around the build hours.
The space size and open sides, the stand type you booked, your exhibit list with each item's weight and size, any demonstration you plan, and the organiser's technical requirements when you have them. Within 24 hours you get a quote broken down item by item, with transport on its own line if the job calls for it.
Tell us how big your space is, how many sides are open and which is the largest machine you want on the booth. Within 24 hours you will have an itemised quote, an early concept for your PVPC Global exhibition stand and a calendar of dates with your design sign off scheduled before the summer break. Phone 0567069088, or message us on WhatsApp.
Most projects here combine more than one service. This is the full range, with the ones closest to this page first.