Walls, floor, light and counter · For the booth you already have

Exhibition Booth Decoration for the Booth You Already Have

Exhibition booth decoration starts where a build does not: the walls are already standing. You booked a shell scheme with white panels, a name board, a table and chairs, or you rented a frame, took a table at a bazaar or a spot in a mall, or last year's booth has begun to look tired. This page sets out what can be dressed and in what order, what the organiser allows on rented walls, and what has to be ready so the work is done in a single visit before the doors open.

180+Exhibition stands built
350+Projects delivered
15+Years building stands
30+Cities we have installed in

The Layers of Exhibition Booth Decoration, in Order

Decoration is decided from the largest surface down to the smallest object. Each layer fixes the colour and the room left for the next, so the walls come first and the plants last.

Walls first, then the name above them

The walls are the largest surface you have, so they are settled before anything else. Full height printed graphics cover the white panels from the floor to the top rail, with the message in the upper half, where a table and standing visitors cannot hide it. Then comes the fascia. The organiser prints that name board from a form you fill in, so write the name on it the way it is written on your wall.

The floor

A shell scheme arrives on the hall carpet or on carpet in the organiser's colour, and many organisers offer another colour on their order form before the deadline. A printed vinyl floor or a low raised floor can be laid over the hall carpet where the manual allows it, and no other layer separates your space from the aisle as clearly.

Light, within the power you have

The shell scheme package usually carries a few spotlights and a socket with a stated load. Arm lights reach over the top of the wall and wash the graphics evenly, and a lightbox makes a single image the brightest thing in the row. Both draw on the same allowance as your screen and your coffee machine, so add up the load before ordering, and ask the organiser for extra power if the sum does not fit.

Counter, display, then the soft layer

The counter takes the place of the organiser's table as the point where a conversation starts. Product display follows: shelves, plinths at different heights and acrylic holders for leaflets and samples. Plants, fabric, cushions and props come last, because they fill the room the earlier layers leave and should never decide it.

What Is Made for a Decorated Booth

Exhibition booth decoration is mostly print and small fabrication. These teams work under the same roof, so the pieces arrive in matching colours.

Printing & Promotional Gifts

Wall graphics, counter wraps and price signs made to the real panel sizes. Graphics are printed in 1 to 5 working days.

Acrylic & Wood Fabrication

Leaflet holders, product risers and sample trays cut to fit your shelf or your counter top.

Promoters & Brand Ambassadors

Hosts who know the product, with a supervisor, so the people in the booth match what hangs on its walls.

Branding & Creative Studio

Artwork laid out on the panel template, with the same typeface and colours on walls, counter and small signs.

Digital Solutions

A screen with its content, and a tablet on the counter that records visitor details.

Experiences & Events

A tasting corner or a live demonstration given its place inside the booth you already have.

Social Media & Content

Photos and short video of the dressed booth at work, published while the show is still open.

Custom Exhibition Stands

When decoration is not enough: a stand designed, built and installed from the first drawing to dismantling.

Where Decorating Does the Whole Job

The reader of this page already has walls, a frame or a table. What changes from case to case is who owns the surface and what they let you do to it.

A shell scheme from the organiser

White panels in an aluminium frame, a fascia with your name, carpet, spotlights, a socket, a table and chairs. The walls belong to the organiser and go back to them, so everything you add has to come off without a mark. Full height graphics, a counter, a floor and added light turn it into a booth that no longer looks like its neighbours.

A rented modular booth

The frame belongs to the rental company, and every panel in it has a template. Decoration here means the printed skin, the counter front and the floor, laid out on those templates so the seams fall on the frame lines and not through a face or a logo. Ask what may be fixed to the frame before anything adhesive is ordered.

A table at a bazaar or a school fair

There are no walls at all, only a table and the space behind it. The decoration is a cloth that reaches the floor, a printed backdrop on its own base, a stepped display on the table top and price signs a standing customer can read. Light comes from a battery lamp or from the one socket the organiser gives you.

A promotion spot in a mall

The mall leases a footprint in a walkway and issues its rules with it: nothing fixed to the floor, cables covered, a height that does not block shop fronts, and a design it approves before set up. Decoration here is freestanding by definition. A counter, a backdrop and a product stand carry the brand, and all of it lifts away at the end of the lease with the floor as it was.

Last year's booth, looking tired

A frame or a joinery booth that still stands straight rarely needs replacing. It needs a new skin: graphics in this year's campaign, a counter face without scratches, a floor without stains and lamps that all give the same colour of light. The structure is kept, and the money goes to the surfaces a visitor sees.

A unit inside a pavilion

A national, chamber or association pavilion gives each company a unit under a common look. The header, the colours and often the counter are fixed by the pavilion organiser, and what remains yours is usually the inner wall and the counter top. Ask the pavilion coordinator for the artwork template and the list of what may not be changed, then spend on the surface that is yours.

From the Organiser's Drawing to the Opening Morning

A dressed booth goes up quickly because everything slow was done earlier. The order below is what makes a single visit to the hall enough.

1

Read the drawing and the package list

Start from the stand drawing the organiser sends and the list of what the shell scheme package contains. The drawing shows the open sides, the posts and the socket. The list shows what you have paid for already, so nothing is bought twice and nothing is assumed to be there.

2

Take the real panel size

A booth sold as 9 square metres is usually measured to the middle of its posts, so the wall you can print on is smaller than the plan suggests. The visible panel is the part between two posts and below the top rail. Take that size from the organiser's technical drawing or ask for it in writing, and ask whether the graphics may run across the posts or must stop at each of them.

3

Send your requests before the deadline

Most changes to a shell scheme are free or cheap when asked for early, and costly or refused later: a fascia removed or reworded, a dividing wall taken out between adjoining spaces, another carpet colour, a higher power load, the table swapped or left out. Each request has a form and a date in the exhibitor manual.

4

Lay out the artwork layer by layer

Artwork is laid out on a template of the real panels: the message high on the back wall, the logo clear of every post line, nothing important in the strip a counter will cover. On a corner booth the counter turns toward the open corner, and on an inline booth it stands to one side so the back wall stays readable. You approve the flat print layout and a view of the booth before anything is printed.

5

Print and prepare everything off site

Graphics are printed in 1 to 5 working days once the artwork is approved. The counter and the freestanding pieces are assembled in our factory first and photographed for you before they are packed.

6

Install, then check on opening morning

Shell scheme exhibitors usually get access last, often only on the day before opening, so the install is planned as a single visit: walls, floor, light, counter, display. On opening morning, look at the booth with the hall lights on, wipe the graphics, aim the spotlights and take a few photographs before the first visitor arrives.

How Long Exhibition Booth Decoration Takes

Printed graphics

1 to 5 working days once the artwork is approved, depending on quantity and material.

An upgraded shell scheme

2 to 3 weeks from the brief, for graphics, a counter, lighting and a floor.

A rental kit from our stock

5 to 10 working days, when there are no walls to dress and a frame is needed.

A modular booth with new graphics

2 to 4 weeks, when the tired booth is a system frame that takes a new skin.

What Moves the Cost of Decorating a Booth

There is no fixed price list here, because exhibition booth decoration is priced from the surfaces it covers. These are the lines that move a quote up or down, set out so that offers can be compared like for like.

How much wall is covered

The printed area is the first line. A back wall alone costs less than every wall from the floor to the top rail, and a corner booth has fewer panels to cover than an inline booth of the same floor size, because one of its sides is open.

Material and how it fixes

Self adhesive vinyl is used once and leaves as waste. Rigid printed boards and fabric stretched on a frame cost more at the first show and travel on to the next. The fixing counts too: a method the organiser accepts on the panels spares you the charge for damaged ones.

The floor

Keeping the organiser's carpet costs nothing. Another carpet colour, then a printed vinyl floor, then a raised floor are each a step up, and the raised floor brings an edge trim and a ramp with it.

Light and power

Arm lights and a lightbox are lines in the quote. The electricity they draw is not: the extra load is ordered from the organiser and paid to the organiser, and a late order usually carries a surcharge.

Pieces made for you

A counter in your identity, shelves, plinths and acrylic holders are made to size, each as a line of its own. The same pieces go home with you and stand again at the next show, which a hired table never does.

The install window, and who supplies what

A night install, a short access slot or a hall far from the loading door all add labour. Where transport applies it is a named line in the quote. Plants, flowers and hired furniture come from their own suppliers or from the organiser's catalogue, and the quote names who supplies each line, so nothing falls between two parties.

Send the organiser's drawing or a photo of the space, with the name of the show and its dates. An itemised quote for decorating your booth reaches you within 24 hours. Request a quote or message 0567069088 on WhatsApp. To see how a budget is put together line by line, read our guide to exhibition stand cost in Saudi Arabia.

What a Shell Scheme Includes, and What You May Change

A shell scheme package differs from show to show, but most hold the same things: white wall panels in an aluminium frame, a fascia with the company name and the stand number, carpet, a few spotlights, a socket, a table, chairs and a waste bin. The package list in the exhibitor manual is the only reliable version. Most organisers will change part of it when asked before the deadline: take off the fascia or a dividing wall, add a lockable cupboard, shelves that hook onto the panels or a door for a small store corner, or lay carpet in another colour. What they rarely allow is anything that marks the panels. Most organisers forbid nails, screws, staples and paint on shell scheme walls and charge the exhibitor for every damaged panel, so graphics hang from hooks on the top rail, stand as rigid boards cut to the panel size, stretch on a frame of their own in front of the wall, or go on as film that peels away cleanly where the manual accepts it. The manual decides which. We prepare the forms and drawings the organiser asks for, and the approval is theirs. For every kind of booth we make, start at exhibition booths in Saudi Arabia. If your plot is bare floor and needs a build, see custom exhibition stands, and for a frame of your own that is dressed again at each show, modular and portable stands. Backdrops, roll ups and product stands for a table or a mall spot are on the exhibition display stands page, the piece that replaces the organiser's table is on promotional counters, and the print itself on printing and promotional production. Budget questions are answered in our article on exhibition booth prices, and the dates of the coming shows are in the Saudi exhibitions calendar.

When Decoration Is Enough and When You Need a Built Booth

Exhibition booth decoration works on what exists. It cannot add height, strength or walls that are not there, and it is honest to say where it stops.

1

The walls are standing and must stay

Decoration is enough. On a shell scheme the organiser will not take away, wall graphics, a counter, a floor and added light give a complete booth, and the money goes into what the visitor sees.

2

You need height or a shape

A shell scheme keeps its height and its posts whatever is printed on it. A tall sign seen from the far end of the hall, a curved wall or a ceiling of your own needs space only and a built or modular booth.

3

Something heavy has to hang

Shell scheme panels are thin infill that carries graphics, not weight. A large screen, loaded shelves or working equipment needs a freestanding unit on the floor, or a built wall with timber behind it.

4

The plot is bare floor

Space only is floor and nothing else: no panels, no carpet and no socket, so there is nothing to decorate. A rental kit from stock or a modular booth gives you the walls first, and the decoration follows on its templates.

5

Only days are left, or the calendar is full

With little time, decoration is the realistic route, because graphics are printed in 1 to 5 working days. With many shows in a year, a modular frame of your own takes each new skin and ends the redecorating of rented walls every time.

Exhibition Booth Decoration Mistakes Seen in Every Hall

None of these is about taste. Each is a fact about panels, power or cameras that was not checked in time.

Printing to the size on the contract

The contract gives the floor area. On a shell scheme the printable face is what is left between the posts and under the top rail, and graphics made to the contract size arrive too wide for every panel. They are then trimmed in the hall with a knife, through the edge of the design.

Screws, nails or strong tape on shell scheme panels

It holds for the show and is billed after it. Most organisers charge each scratched or torn panel to the exhibitor, and adhesive that leaves residue counts as damage. Use the fixing the manual names.

The message behind the furniture

A table against the back wall and a row of standing people hide its lower half, and text placed there is read by nobody. The line that matters belongs above shoulder height, and the lower part of the wall carries colour or a large image.

More lamps than the socket allows

Arm lights, a lightbox, a screen, a fridge and a kettle on a basic socket trip the breaker in the first busy hour. Add up the load while the lighting is being chosen, and order the extra power while the organiser's form is still open.

Gloss print under spotlights

A glossy surface throws each spotlight back as a white patch, in the aisle and in every photograph. Matt film or a matt laminate keeps the image readable from any angle and through a phone camera.

The year printed on the biggest wall

A show name, a date or a stand number on the main graphic makes it single use. Keep the large surfaces free of dates and put anything dated on a small panel that is replaced, so the walls can stand again.

Print, Counter and Acrylic From One Factory

Large format print, acrylic, joinery, paint, CNC and laser cutting, design and installation are all in house at The Touch, so the wall graphics, the counter and the small display pieces are made in the same colours and arrive together. Our own team installs them, stays for the opening and dismantles when the show closes. Our stands and displays have stood for Kinan, the Heritage Commission, Saudia Holidays, Johnson & Johnson MedTech and Cartoon Network.

Decoration From Our Work

Halls, entrances and occasions our team decorated.

Tea brand wall, by The Touch
Tea brand wall
Market stall wall, by The Touch
Market stall wall
Market stall corner, by The Touch
Market stall corner
Laundry shelf display, by The Touch
Laundry shelf display
Kitchen brand corner, by The Touch
Kitchen brand corner

Questions About Exhibition Booth Decoration

What exhibitors ask when the booth is booked and the walls are still white.

What does exhibition booth decoration include?

Everything that dresses a space you already have: printed wall graphics, the floor, added light, a counter, product display and the small signs. It does not include building walls or a structure. If your booth needs those, it is a build, not decoration, and it is quoted as one.

Can a shell scheme be decorated without damaging its panels?

Yes. Graphics hang from the top rail, stand as rigid boards between the posts, stretch on a frame of their own or go on as removable film, depending on what the exhibitor manual accepts. Most organisers forbid nails, screws and paint and charge for damaged panels, so the fixing is chosen from the manual before anything is printed.

How is a corner booth decorated differently from an inline booth?

A corner booth has two open sides, and so fewer walls. The main message goes on the wall facing the busier aisle, the counter turns toward the corner to greet people from both directions, and the fascia runs along both sides, so the name is read twice. Nothing tall should stand at the open corner itself.

How long does it take, and can it be installed in one day?

Graphics are printed in 1 to 5 working days after the artwork is approved, and an upgraded shell scheme takes 2 to 3 weeks from the brief. The install itself is a single visit, usually on the evening before opening, provided the artwork is approved, the power is ordered, the crew passes are issued and the organiser has handed the shell scheme over. The quote states the dates.

Do you supply flowers, plants, balloons and furniture?

Flowers and plants come from a florist or a nursery, balloons from a party supplier, and extra furniture usually from the organiser's hire catalogue or a furniture supplier. Many venues restrict helium balloons, so ask before ordering them. Tell us what you plan to bring so the layout leaves room for it, and the quote names who supplies each line.

How do we decorate a table at a bazaar or a school fair?

With a cloth to the floor that hides the cartons, a printed backdrop on its own base, a stepped display on the table top and price signs that can be read standing. Ask the organiser whether the table has a socket. If it has none, battery lamps are enough for a single table, and outdoors every base needs a weight.

Can the booth take a Ramadan or National Day look without being rebuilt?

Yes, when the season is a layer and the base stays neutral. A counter wrap on magnetic tape, a printed header, a fabric drape and a set of table signs move the booth to Ramadan, National Day, Founding Day or a new product colour, then come off again. If you use the official National Day or Founding Day identity, take the current year's files and usage guide from the official source.

How do we make the booth look right in photographs?

Decide where people will stand for a picture, usually beside the counter, and put the logo behind that spot above shoulder height. Use matt surfaces so the spotlights do not flare, avoid fine close stripes that shimmer on a phone screen, and keep that corner free of cartons and bags. A booth is seen in photographs long after the aisle has emptied.

What can we keep for the next show?

Rigid boards, fabric graphics, the counter, acrylic holders, arm lights and table cloths all travel again if they are stored flat or rolled, and dry. Self adhesive film does not survive being peeled. If the panel size of your next booth may differ, choose fabric on a frame of its own, which does not depend on shell scheme walls and can rest in our storage between shows.

How do we start?

The Touch has more than one location in the Kingdom. Your graphics, counter and display pieces are made in our own factory and fitted by our own team. Send the organiser's drawing or a photo of the space, with the show and its dates, on WhatsApp at 0567069088 or through the quote page, and an itemised quote follows within 24 hours.

A Booth That Is Booked and Still Bare?

Send the organiser's drawing or a photo of the space, the show and its dates. Within 24 hours you have an itemised quote that names every surface, every piece and who supplies it.

More specific pages on this

If your question is narrower than this page, these are written for one question each.

1
Powered by Joinchat
Call now WhatsApp